电子发烧友App

硬声App

0
  • 聊天消息
  • 系统消息
  • 评论与回复
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看威廉希尔官方网站 视频
  • 写文章/发帖/加入社区
会员中心
创作中心

完善资料让更多小伙伴认识你,还能领取20积分哦,立即完善>

3天内不再提示
创作
电子发烧友网>电子资料下载>类型>参考设计>ADALM-BUCK-ARDZ用户指南

ADALM-BUCK-ARDZ用户指南

2021-03-23 | pdf | 171.01KB | 次下载 | 3积分

资料介绍

This version (10 Aug 2019 17:24) was approved by Mark Thoren.The Previously approved version (19 Jul 2019 16:51) is available.Diff

ADALM-BUCK-ARDZ hardware

Description

The ADALM-BUCK-ARDZ board is a companion module for the Buck Basics lab exercise: Activity: Buck Converter Basics

This lab exercise can be done on a breadboard using parts from the ADALP2000 parts kit, but it is too involved to do in a hands-on seminar session or single-day workshop. The ADALM-BUCK-ARDZ module is designed to eliminate the assembly time associated with constructing the circuit on a breadboard, while keeping all of the measurements and experiments intact.

The Figure 1 shows the various connections, and along with the schematic below can be used as a guide as you work through the lab exercise.

Figure 1. ADALM-BUCK connections and jumpers

ADALM-BUCK-ARDZ Jumpers and Connections

The default jumper configurations for this board model are as follows:

Jumper Function Default Setting
P1 Power Supply SelectShunt installed across pins 2 & 3 (5V from Arduino)
P2 Inductor Tap #Shunt installed across pins 1 & 2 (6 taps/max inductance)
P3 Inductor Voltage Open (for M2K connection)
P5 DC coupling (remove for AC coupling)Shunt installed
P6 Output at pin 1, lower 2 pins are GND Open (for M2K connection)
P10 Arduino Analog input 0Solder Blobbed
P13 Override source Shunt installed across pins 1 & 2 (Arduino PWM)
P17 Enable Override Shunt NOT installed
P18 Switch Node at pin 1, lower 2 pins are GND Open (for M2K connection)
P19 10μF output capacitorShunt installed
P20 47μF output capacitorShunt installed
P24 Arduino PWM output 3Solder Blobbed
All Others Open / no shunt installed

Hardware Setup Procedure

Figure 2 shows the ADALM2000 connections for measuring the switch node voltage on Channel 1 and ripple current on Channel 2. The ADALM-BUCK is installed on an Arduino UNO clone with LT1054_voltage_mode_buck_DC_ctrl.ino sketch uploaded (refer to Buck Basics lab exercise for details.)

Figure 2. ADALM-BUCK - ADALM2000 connections

Schematic, PCB Layout, Bill of Materials

ADALM-BUCK-ARDZ Design & Integration Files

End of Document

评论

查看更多

下载排行

本周

  1. 1电子电路原理第七版PDF电子教材免费下载
  2. 0.00 MB  |  1491次下载  |  免费
  3. 2单片机典型实例介绍
  4. 18.19 MB  |  95次下载  |  1 积分
  5. 3S7-200PLC编程实例详细资料
  6. 1.17 MB  |  27次下载  |  1 积分
  7. 4笔记本电脑主板的元件识别和讲解说明
  8. 4.28 MB  |  18次下载  |  4 积分
  9. 5开关电源原理及各功能电路详解
  10. 0.38 MB  |  11次下载  |  免费
  11. 6100W短波放大电路图
  12. 0.05 MB  |  4次下载  |  3 积分
  13. 7基于单片机和 SG3525的程控开关电源设计
  14. 0.23 MB  |  4次下载  |  免费
  15. 8基于AT89C2051/4051单片机编程器的实验
  16. 0.11 MB  |  4次下载  |  免费

本月

  1. 1OrCAD10.5下载OrCAD10.5中文版软件
  2. 0.00 MB  |  234313次下载  |  免费
  3. 2PADS 9.0 2009最新版 -下载
  4. 0.00 MB  |  66304次下载  |  免费
  5. 3protel99下载protel99软件下载(中文版)
  6. 0.00 MB  |  51209次下载  |  免费
  7. 4LabView 8.0 专业版下载 (3CD完整版)
  8. 0.00 MB  |  51043次下载  |  免费
  9. 5555集成电路应用800例(新编版)
  10. 0.00 MB  |  33562次下载  |  免费
  11. 6接口电路图大全
  12. 未知  |  30320次下载  |  免费
  13. 7Multisim 10下载Multisim 10 中文版
  14. 0.00 MB  |  28588次下载  |  免费
  15. 8开关电源设计实例指南
  16. 未知  |  21539次下载  |  免费

总榜

  1. 1matlab软件下载入口
  2. 未知  |  935053次下载  |  免费
  3. 2protel99se软件下载(可英文版转中文版)
  4. 78.1 MB  |  537793次下载  |  免费
  5. 3MATLAB 7.1 下载 (含软件介绍)
  6. 未知  |  420026次下载  |  免费
  7. 4OrCAD10.5下载OrCAD10.5中文版软件
  8. 0.00 MB  |  234313次下载  |  免费
  9. 5Altium DXP2002下载入口
  10. 未知  |  233046次下载  |  免费
  11. 6电路仿真软件multisim 10.0免费下载
  12. 340992  |  191183次下载  |  免费
  13. 7十天学会AVR单片机与C语言视频教程 下载
  14. 158M  |  183277次下载  |  免费
  15. 8proe5.0野火版下载(中文版免费下载)
  16. 未知  |  138039次下载  |  免费