资料介绍
Accurate Antenna Measurements and the NetTek YBA250:Reflection measurements are usually made as a comparison of
the unknown (device being measured) to a known standard. This
standard is assumed to be perfect. The process of comparing is
called “calibrating” the measurement equipment.
Any non-precision cable that is placed in between the YBA250
(where the comparison to the standard was made) and the antenna
system to be measured can dramatically affect the reflection or VSWR
measurement. The higher the frequency of measurement, the worse
the degradation will likely be. The measurements made here are done
for a sweep of 100 MHz to 2000 MHz. The comparisons are mostly
made at the US PCS band at 1900 MHz.
Two distinct types of errors are introduced by a jumper cable.
The first type includes two separate errors: the reflection of the cable
itself and loss of the cable. The reflection of the cable usually causes
a device being tested to seem to have a worse VSWR or return loss
(RL) than it actually has. The loss of a cable will cause the device
being tested to seem to have a better VSWR or return loss than it
actually has. Any cable loss simply adds directly to the measured
return loss, but a reflection due to the cable itself can have a huge
effect, and may actually dominate the measurement result.
Interestingly, the two errors have different effects. Loss in the cable
has more effect on measurements of a device with small return loss
(poor VSWR) and any reflections in the jumper have a much larger
effect on measurements of high return loss (good VSWR).
The second type of error is the change in reflection, phase, or loss
of the cable as it is flexed or bent. This causes readings to change
as the jumper is bent (particularly for measurements of antennas with good VSWR).
the unknown (device being measured) to a known standard. This
standard is assumed to be perfect. The process of comparing is
called “calibrating” the measurement equipment.
Any non-precision cable that is placed in between the YBA250
(where the comparison to the standard was made) and the antenna
system to be measured can dramatically affect the reflection or VSWR
measurement. The higher the frequency of measurement, the worse
the degradation will likely be. The measurements made here are done
for a sweep of 100 MHz to 2000 MHz. The comparisons are mostly
made at the US PCS band at 1900 MHz.
Two distinct types of errors are introduced by a jumper cable.
The first type includes two separate errors: the reflection of the cable
itself and loss of the cable. The reflection of the cable usually causes
a device being tested to seem to have a worse VSWR or return loss
(RL) than it actually has. The loss of a cable will cause the device
being tested to seem to have a better VSWR or return loss than it
actually has. Any cable loss simply adds directly to the measured
return loss, but a reflection due to the cable itself can have a huge
effect, and may actually dominate the measurement result.
Interestingly, the two errors have different effects. Loss in the cable
has more effect on measurements of a device with small return loss
(poor VSWR) and any reflections in the jumper have a much larger
effect on measurements of high return loss (good VSWR).
The second type of error is the change in reflection, phase, or loss
of the cable as it is flexed or bent. This causes readings to change
as the jumper is bent (particularly for measurements of antennas with good VSWR).
下载该资料的人也在下载
下载该资料的人还在阅读
更多 >
- UWB antenna measurements in time 5次下载
- 探测威廉希尔官方网站 精确测量电压与示波器功率转换器的应用笔记_英文 8次下载
- 精确的电流测量电源与示波器_英文 13次下载
- Fast, easy, accurate identific
- Agilent N7300 Series Chipset S
- LTCC Antenna LTCC 天线
- Agilent Antenna and RCS Measur
- Make Better RMS Measurements w
- Accurate Studies on the High—-
- Accurate Power Measurements on
- High Speed Measurements on Mod
- 数字时序的测量 0次下载
- 数字时序测量 0次下载
- Digital timing measurements 0次下载
- Omnidirectional WLAN Antenna A
- 蓝牙也可以测距定位,精度1m且不用阵列天线! 1209次阅读
- innovus中如何手动拉线及常用快捷键 3039次阅读
- 利用MATLAB进行天线阵列方向图综合 5727次阅读
- FCC有关卫星地球站天线的性能指标学习笔记 876次阅读
- EAST模型结构 2300次阅读
- 介绍放宽约束的等价性比对sequential equivalence 985次阅读
- 宽禁带器件和仿真环境介绍 1457次阅读
- 在贴片加工厂中有哪些安全防护需要了解 1306次阅读
- 复合放大器实现高精度的高输出驱动能力 获得最佳的性能 1600次阅读
- 辐射测试中Antenna与EUT的测试距离换算 6145次阅读
- 用降压型稳压器或线性稳压器电源时值来会为负载供电 984次阅读
- 锂电池并联充电时保护板均衡原理 3w次阅读
- 采用封装天线(Antenna-in-Package,AiP)威廉希尔官方网站 的雷达芯片 2.3w次阅读
- 更小更智能的电机控制器推进HEV/EV市场 1105次阅读
- 智能天线威廉希尔官方网站 研究及其相关介绍 685次阅读
下载排行
本周
- 1电子电路原理第七版PDF电子教材免费下载
- 0.00 MB | 1490次下载 | 免费
- 2单片机典型实例介绍
- 18.19 MB | 92次下载 | 1 积分
- 3S7-200PLC编程实例详细资料
- 1.17 MB | 27次下载 | 1 积分
- 4笔记本电脑主板的元件识别和讲解说明
- 4.28 MB | 18次下载 | 4 积分
- 5开关电源原理及各功能电路详解
- 0.38 MB | 10次下载 | 免费
- 6基于AT89C2051/4051单片机编程器的实验
- 0.11 MB | 4次下载 | 免费
- 7蓝牙设备在嵌入式领域的广泛应用
- 0.63 MB | 3次下载 | 免费
- 89天练会电子电路识图
- 5.91 MB | 3次下载 | 免费
本月
- 1OrCAD10.5下载OrCAD10.5中文版软件
- 0.00 MB | 234313次下载 | 免费
- 2PADS 9.0 2009最新版 -下载
- 0.00 MB | 66304次下载 | 免费
- 3protel99下载protel99软件下载(中文版)
- 0.00 MB | 51209次下载 | 免费
- 4LabView 8.0 专业版下载 (3CD完整版)
- 0.00 MB | 51043次下载 | 免费
- 5555集成电路应用800例(新编版)
- 0.00 MB | 33562次下载 | 免费
- 6接口电路图大全
- 未知 | 30320次下载 | 免费
- 7Multisim 10下载Multisim 10 中文版
- 0.00 MB | 28588次下载 | 免费
- 8开关电源设计实例指南
- 未知 | 21539次下载 | 免费
总榜
- 1matlab软件下载入口
- 未知 | 935053次下载 | 免费
- 2protel99se软件下载(可英文版转中文版)
- 78.1 MB | 537791次下载 | 免费
- 3MATLAB 7.1 下载 (含软件介绍)
- 未知 | 420026次下载 | 免费
- 4OrCAD10.5下载OrCAD10.5中文版软件
- 0.00 MB | 234313次下载 | 免费
- 5Altium DXP2002下载入口
- 未知 | 233045次下载 | 免费
- 6电路仿真软件multisim 10.0免费下载
- 340992 | 191183次下载 | 免费
- 7十天学会AVR单片机与C语言视频教程 下载
- 158M | 183277次下载 | 免费
- 8proe5.0野火版下载(中文版免费下载)
- 未知 | 138039次下载 | 免费
评论
查看更多