资料介绍
This dual-bit noninverting bus transceiver uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 V to 3.6 V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.2 V to 3.6 V. This allows for universal low-voltage bidirectional translation between any of the 1.2-V, 1.5-V, 1.8-V, 2.5-V, and 3.3-V voltage nodes.
The SN74AVC2T245 is designed for asynchronous communication between two data buses. The logic levels of the direction-control (DIR) input and the output-enable (OE) activate either the B-port outputs or the A-port outputs or place both output ports into the high-impedance mode . The device transmits data from the A bus to the B bus when the B-port outputs are activated and from the B bus to the A bus when the A-port outputs are activated. The input circuitry on both A and B ports always is active and must have a logic HIGH or LOW level applied to prevent excess ICC and ICCZ.
The SN74AVC2T245 is designed so that the control pins (DIR1, DIR2, and OE) are supplied by VCCA.
This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.
The VCC isolation feature ensures that if either VCC input is at GND, both ports are in the high-impedance state.
To ensure the high-impedance state during power up or power down, OE must be connected to VCC through a pull-up resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
- 双位双电源总线收发器SN74AVC2T245数据表
- SN74AVC2T45-Q1,pdf(Dual-Bit Du
- SN74LVC8T245-EP,pdf(8-Bit Dual
- SN74LVC8T245,pdf(8-BIT DUAL-SU
- SN74LVC2T45,pdf(Dual-Bit Dual-
- SN74AVCH32T245,pdf(32-BIT DUAL
- SN74AVCH2T45,pdf(Dual-Bit Dual
- SN74AVCH20T245,pdf(20-BIT DUAL
- SN74AVC8T245-Q1,pdf(8-Bit Dual
- SN74AVC32T245,pdf(32-BIT DUAL-
- SN74AVC2T45,pdf(DUAL-BIT DUAL-
- SN74AVC24T245,pdf(24-BIT DUAL-
- SN74AVC20T245,pdf(20-BIT DUAL-
- SN74AVC16T245-Q1,pdf(16-Bit Du
- SN74AVC16T245,pdf(16-BIT DUAL-
- 单口、双口、简单双口、真双口RAM的区别 3682次阅读
- 基于双口RAM和SN74LVTH245A芯片实现长距离数据传输系统的设计 3802次阅读
- 信步科技SV6-E6614主板规格 1188次阅读
- 友善之臂SOM-RK3399介绍 1w次阅读
- RK3399Pro嵌入式芯片参数介绍 8443次阅读
- 浅谈SN74HC541特征应用及设备信息 3570次阅读
- 分享SN74HC541N集成块的功能及逻辑图函数表 1.1w次阅读
- 74hc245的作用是什么 74hc245应用原理是什么 20.3w次阅读
- 74ls245中文资料详细(74ls245管脚功能_工作原理方法及应用电路) 12.2w次阅读
- 74hc245引脚图及功能介(功能真值表及逻辑框图) 17.9w次阅读
- 74hc245中文资料详细(74hc245管脚功能_工作原理方法_电气特性及应用电路) 5.8w次阅读
- 74ls245的工作原理及作用详解 5.7w次阅读
- 74ls245是什么_74ls245使用方法_74ls245的作用是什么 3.6w次阅读
- SN74LS161在数字电路中的抗干扰应用 7065次阅读
- 74HC245引脚图应用电路与中文资料 5.7w次阅读
下载排行
本周
- 1TC358743XBG评估板参考手册
- 1.36 MB | 330次下载 | 免费
- 2开关电源基础知识
- 5.73 MB | 11次下载 | 免费
- 3嵌入式linux-聊天程序设计
- 0.60 MB | 3次下载 | 免费
- 4DIY动手组装LED电子显示屏
- 0.98 MB | 3次下载 | 免费
- 5基于FPGA的C8051F单片机开发板设计
- 0.70 MB | 2次下载 | 免费
- 651单片机窗帘控制器仿真程序
- 1.93 MB | 2次下载 | 免费
- 751单片机PM2.5检测系统程序
- 0.83 MB | 2次下载 | 免费
- 8基于51单片机的RGB调色灯程序仿真
- 0.86 MB | 2次下载 | 免费
本月
- 1OrCAD10.5下载OrCAD10.5中文版软件
- 0.00 MB | 234315次下载 | 免费
- 2555集成电路应用800例(新编版)
- 0.00 MB | 33566次下载 | 免费
- 3接口电路图大全
- 未知 | 30323次下载 | 免费
- 4开关电源设计实例指南
- 未知 | 21549次下载 | 免费
- 5电气工程师手册免费下载(新编第二版pdf电子书)
- 0.00 MB | 15349次下载 | 免费
- 6数字电路基础pdf(下载)
- 未知 | 13750次下载 | 免费
- 7电子制作实例集锦 下载
- 未知 | 8113次下载 | 免费
- 8《LED驱动电路设计》 温德尔著
- 0.00 MB | 6656次下载 | 免费
总榜
- 1matlab软件下载入口
- 未知 | 935054次下载 | 免费
- 2protel99se软件下载(可英文版转中文版)
- 78.1 MB | 537798次下载 | 免费
- 3MATLAB 7.1 下载 (含软件介绍)
- 未知 | 420027次下载 | 免费
- 4OrCAD10.5下载OrCAD10.5中文版软件
- 0.00 MB | 234315次下载 | 免费
- 5Altium DXP2002下载入口
- 未知 | 233046次下载 | 免费
- 6电路仿真软件multisim 10.0免费下载
- 340992 | 191186次下载 | 免费
- 7十天学会AVR单片机与C语言视频教程 下载
- 158M | 183279次下载 | 免费
- 8proe5.0野火版下载(中文版免费下载)
- 未知 | 138040次下载 | 免费
评论
查看更多