期待了很久的昉·星光2开发板终于到了手中,颜值十分的高!
开箱
首先拆开快递盒,看到包装盒十分的炫酷

打开盒子,开发板太酷啦,可以看到是双网口的,还有四个USB3.0的接口,功能十分的丰富!

硬件配置

烧录系统
以下内容参考官网文档来进行操作: https://wiki.rvspace.org/en/project/VisionFive2_Debian_Wiki_202302_Release
首先设置 boot 模式为 SD 卡启动,根据文档需要将拨码设置为 1,0


查阅文档可以看到 VisionFive 2 开发板可以使用三种储存介质启动系统
我这里使用的是 Windows 来制作启动系统用的 SD 卡,首先使用 balena Etcher 工具,下载链接: https://etcher.balena.io/ 来烧录系统,系统的镜像包的下载链接: https://pan.baidu.com/s/146_K7BNT0cBfMUeTpvb3uA?pwd=csx2 ,下载完毕后把镜像包烧录到 SD 卡中

查看文档中给出的 IO 布局图,把 USB 转串口模块用线连接到开发板

插上 SD 卡,上电启动,这里使用 tabby 来查看串口的输出,波特率为 115200

我这里用的是 HDMI 采集器,使用的 Poplayer 来打开摄像头查看开发板的 HDMI 输出,可以看到显示出了登陆界面(账号 user 密码 starfive),至此系统安装就完成了

|