本人11年毕业,一直从事单片机相关的开发工作,工作中一般用到的是嵌入式实时系统,比较感兴趣liunx的开发板,偶然间看到发烧友论坛的试用帖子,想着申请碰一下运气,可以感受一下linux操作系统的魅力,在这里要感谢深圳触觉智能科技有限公司和电子发烧友网提供的此次试用机会,可以体验Purple Pi开发板的强劲性能。
-
首先我们先了解一下开发板的基本信息。
Purple Pi智能主板,配备SigmaStar SSD201/ 202 (ARM Cortex-A 7 )双核 1 .2GHz CPU,内置2D图形引擎;⽀持RGB 565 、MIPI屏显示接⼝。⽀持Linux buildroot+QT 5 /buildroot+LVGL、Ubuntu- base、OpenWRT⽂件系统。


-
测试miniusb
如图链接miniusb接口,并将J11端子的短路子短接;

打开secureCRT,设置串口参数;

连接后重启板卡,显示如下信息,证明链接成功;

-
连接家里WiFi
输入指令ifconfig,查看网卡信息;
使用vim修改/etc/wpa_supplicant.conf 文件,将其中的ssid和psk修改为自己的wifi名称和密码,其他不需要更改。
network={
ssid="TP-LINK_2G_RONNIE"
psk="12345678"
key_mgmt=WPA-PSK
priority=2
}
保存退出vim。
然后启动wifi设备并初始化,命令如下:
/config/wifi/ssw01bInit.sh
串口输出信息

终端中再次输入如下指令
wpa_supplicant nl80211 -i wlan0 -c /etc/wpa_supplicant.conf -B &
终端信息输出如下图,同时PING www.baidu.com显示已连接网路。

用ctrl+c打断ping指令,输出ifconfig指令,查看无线网卡IP地址。wlan0即为板卡的无线网卡,IP为192.168.10.18。到此Purple Pi开发板开箱测试暂时告一段落,之后会测试下I2C端口,测试成功后会继续发帖。谢谢大家

|