CC1350 ADCBU求助

cc1350使用adcbuf例程进行多通道采集，只能读取到一路数据，提问ti论坛，告知要使用不同的samplebuf并且要停掉一路channel，启用一路，每台听懂，有大佬告知么，我将我的代码贴到下方，具体该如何操作
    UART_Params uartParams;
    ADCBuf_Handle adcBuf;
    ADCBuf_Params adcBufParams;
    ADCBuf_Conversion continuousConversion[4];
    /* Call driver init functions */
    ADCBuf_init();
    UART_init();
    /* Create a UART with data processing off. */
    UART_Params_init(&uartParams);
    uartParams.writeDataMode = UART_DATA_BINARY;
    uartParams.writeMode = UART_MODE_CALLBACK;
    uartParams.writeCallback = uartCallback;
    uartParams.baudRate = 115200;
    uart = UART_open(Board_UART0, &uartParams);
    /* Set up an ADCBuf peripheral in ADCBuf_RECURRENCE_MODE_CONTINUOUS */
    ADCBuf_Params_init(&adcBufParams);
    adcBufParams.callbackFxn = adcBufCallback;
    adcBufParams.recurrenceMode = ADCBuf_RECURRENCE_MODE_CONTINUOUS;
    adcBufParams.returnMode = ADCBuf_RETURN_MODE_CALLBACK;
    adcBufParams.samplingFrequency = 200;
    adcBuf = ADCBuf_open(Board_ADCBUF0, &adcBufParams);
    /* Configure the conversion struct */
    continuousConversion[0].arg = NULL;
    continuousConversion[0].adcChannel = 2;
    continuousConversion[0].sampleBuffer = sampleBufferOne;
    continuousConversion[0].sampleBufferTwo = sampleBufferTwo;
    continuousConversion[0].samplesRequestedCount = ADCBUFFERSIZE/4;
    continuousConversion[1].arg = NULL;
    continuousConversion[1].adcChannel = 3;
    continuousConversion[1].sampleBuffer = sampleBufferOne2;
    continuousConversion[1].sampleBufferTwo = sampleBufferTwo2;
    continuousConversion[1].samplesRequestedCount = ADCBUFFERSIZE/4;

    continuousConversion[2].arg = NULL;
    continuousConversion[2].adcChannel = 4;
    continuousConversion[2].sampleBuffer = sampleBufferOne3;
    continuousConversion[2].sampleBufferTwo = sampleBufferTwo3;
    continuousConversion[2].samplesRequestedCount = ADCBUFFERSIZE/4;

    continuousConversion[3].arg = NULL;
    continuousConversion[3].adcChannel = 5;
    continuousConversion[3].sampleBuffer = sampleBufferOne4;
    continuousConversion[3].sampleBufferTwo = sampleBufferTwo4;
    continuousConversion[3].samplesRequestedCount = ADCBUFFERSIZE/4;

    if (adcBuf == NULL){
        /* ADCBuf failed to open. */
        while(1);
    }
    /* Start converting. */
    if (ADCBuf_convert(adcBuf, continuousConversion, 4) !=
        ADCBuf_STATUS_SUCCESS) {
        /* Did not start conversion process correctly. */
        while(1);
    }