请问我能将ADS 2009 DesignKits转换为ADS 2011吗？

设计套件转换当然是可能的。
对于ADS 20011.01 / ADS 2011.05，请参阅“帮助”>“主题和索引”，然后导航至“ADS快速参考”>“ADS 2011 PDK升级”>“升级ADS 2011的PDK”对于ADS 2011.10，请参阅“帮助”>“主题和索引”，然后导航至“入门”>“ADS快速参考”>
ADS 2011 PDK升级>升级ADS 2011的PDK任何一个版本都会引导您完成这些过程。
但请注意：*重要* PDK的最终用户无法成功升级PDK。
升级过程要求所有源都存在，并且在转换成功之前经常需要修改PDK。
请联系您的PDK供应商，以咨询有关ADS 2011升级的PDK的信息。



     以下为原文

  Design Kit conversion is certainly possible.

For ADS 20011.01/ADS 2011.05 see Help > Topics and Index and then navigate to ADS Quick Reference > ADS 2011 PDK Upgrade > Upgrading PDKs for ADS 2011

For ADS 2011.10 see Help > Topics and Index and then navigate to Getting Started > ADS Quick Reference >  ADS 2011 PDK Upgrade > Upgrading PDKs for ADS 2011

Either version leads you through the procedures. However, please note:

*Important*
PDKs cannot be successfully upgraded by the end users of the PDKs. The upgrade process requires that all source be present and frequently requires modifications to the PDK before conversion is successful. Contact your PDK vendor to inquire about upgraded PDKs for ADS 2011.