MPLAB C18不支持扩展模式

我有一个PIC18F45 K22的产品。我有MPLAB 8.45，在那里我准备了这个项目，并把它发送到我的CutoMeor，也有MPLAB。直到几天前，他才能够编译我发给他的代码。他开始收到一个错误信息，说C18不支持扩展模式。OPEDE总是在扩展模式下定义，而我发送的旧版本仍然可以在他的MPLAB中编译。当我把这些旧版本重新编译到MPLAB中并发送给他时，他收到了同样的错误信息。有什么错误吗？GalIt是错误消息：从GALV1-0 V3.3.1  V1-0DEVIN ProPosior开始发布项目C:AuthsApple FWW。MCP启动。语言工具版本：MPASMWIN .EXE V5.54，MPLANKIK.EXE V5.00，MCC18.EXE V3.47，MPLBI.EXE V5.00 Mon 11月14日11:30:56 2016 -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------：目标：“Galv1-0 v3.3.1v1-0dpay-ADC.O”是过时的。执行：“C:程序文件（x86） Microchip  MPLABC18  V3.47  bin McC18.exe”-P= 18F45 K22“dpAdc.c”-Fo＝“DPY-ADC.O”-扩展-OU-OT -OB-OP-或-O。-----------D-OPA-MPLAB C18 3.47（功能有限）版权为2000年至2011年的Microchip威廉希尔官方网站 公司。该版本的MPLAB C18不支持扩展模式，不会执行所有优化。要购买一整套MPLAB C18，请与当地经销商联系或访问..micro..com.ERROR：此版本的MPLLABC18不支持扩展模式。根据请求在第一次失败时停止构建。--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------“C:用户\alonalon文档神圣Pro文档神圣Pro\FW\FroGal Gal神圣Pro文档\\V1-V1-V1-V1-0V1-0V3.3.3.3.3.1\\\\\\V1 V1 V1 V1 V1 V1-V1-V1-V1-V1-V1-V1-0V1-0V1-0V2016年11月14日11:31:00--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------发光二极管



      以下为原文

    I have a producr with PIC18F45K22.
I have MPLAB 8.45, where I prepare the project, and send it to my cutomer, that also have MPLAB.
till a few days ago, he was able to compile the code I have sent him.
Than, he started receive an error message, saying that the C18 does not support extended mode.
The project was always defined in extended mode, and older versions that I have sent can still be compiled in his MPLAB.
When I take these old versions, recompile again in my MPLAB, and send him, he receives the same error message.
Any idea what went wrong?
Gal

Here is the error message:

Release build of project `C:UsersalonDocumentsDivine ProFWFrom GalV1-0 V3.3.1V1-0DevineProApplicator.mcp' started.
Language tool versions: mpasmwin.exe v5.54, mplink.exe v5.00, mcc18.exe v3.47, mplib.exe v5.00
Mon Nov 14 11:30:56 2016
----------------------------------------------------------------------
Make: The target "C:UsersalonDocumentsDivine ProFWFrom GalV1-0 V3.3.1V1-0DP_Adc.o" is out of date.
Executing: "C:Program Files (x86)Microchipmplabc18v3.47binmcc18.exe" -p=18F45K22 "DP_Adc.c" -fo="DP_Adc.o" --extended -Ou- -Ot- -Ob- -Op- -Or- -Od- -Opa-
MPLAB C18 3.47 (feature limited)
Copyright 2000-2011 Microchip Technology Inc.
This version of MPLAB C18 does not support the extended mode
and will not perform all optimizations.  To purchase a full
copy of MPLAB C18, please contact your local distributor or
visit buy.microchip.com.

ERROR:  This version of MPLAB C18 does not support extended mode.
Halting build on first failure as requested.
----------------------------------------------------------------------
Release build of project `C:UsersalonDocumentsDivine ProFWFrom GalV1-0 V3.3.1V1-0DevineProApplicator.mcp' failed.
Language tool versions: mpasmwin.exe v5.54, mplink.exe v5.00, mcc18.exe v3.47, mplib.exe v5.00
Mon Nov 14 11:31:00 2016
----------------------------------------------------------------------
BUILD FAILED