需要RN2903 Mote传输特定的Lora数据

我有Lora威廉希尔官方网站 评估套件900DV164140-2（网关核心板、网关子板和2-RN2903 Mote板（DM164139）。为了便于使用，我想给mote发送一条消息，该消息带有一个命令，当RN2903接收到该消息时，该命令将响应它的下一次发送有效负载，该有效负载包含以下内容：time消息是receivedTime消息；NRI已经浏览了RN2903 LoRa™威廉希尔官方网站 模块命令参考用户指南，但是没有看到包含我所寻找的所有内容的命令。因为我找不到允许重新编程的固件/软件，我想知道是否有其他可用的命令（可能用于测试）可以提供这些信息，但是没有列在上述文档中？我有没有正确的RN2903板或我需要得到另一个，如果是的话，哪一个？



      以下为原文

    I have the Lora Technology Evaluation Kit 900 DV164140-2 (Gateway Core board, Gateway daughter board, and 2- RN2903 Mote boards (DM164139). For my use, I want to send the mote a message with a command that when received by the RN2903 will answer on its’ next transmit a payload containing the following:

• Time message was received
• Time message was sent by the gateway
• The gateway ID that sent the message
• The received message signal strength
• SNR
  

I’ve looked through the RN2903 LoRa™ Technology Module Command Reference User’s Guide but do not see a command that contains all of what I’m looking for.  Since I can’t find firmware/software that might allow reprogramming, I wondered if there are additional commands available (maybe used for testing) that would provide me with this information but not listed in the mentioned document? Do I have the correct RN2903 board or do I need to get another one and if so which one?