EZ-USB未被识别为驱动程序

您在设备管理器中看到的错误代码是什么？设备管理器中看到的VID/PID是什么？通过SUITEUSB移植到CysB.SyS是一个很好的想法。
问候，阿南德



     以下为原文
  What is the error code you're seeing in device manager and what is the VID/PID being seen in device manager? Migrating to CyUSB.sys available through SuiteUSB would be a great idea.
    Regards,
Anand

我无法把设备与司机相匹配。
设备实例ID为：
USB  VIDY0566＆PIDYB405  5和1F8094F2和0和5；
硬件IDS是：
USB  VIDY0566＆PIDYB405＆RevI000万USB VIDY0566＆PIDYB405
当我试图指向EZUSB系统或我的.INF文件时，我得到了错误：“指定的位置不包含关于硬件的信息。”
我不认为迁移到CysBiSyS会改善我的情况，如果我甚至不能强迫设备匹配一个司机。还有其他人遇到过这个问题吗？



     以下为原文
  I cannot match the device to the driver.  
    The Device Instance ID is :
    USBVID_0456&PID_B4055&1F8094F2&0&5
    The Hardware IDs are:
    USBVid_0456&Pid_b405&Rev_0000
USBVid_0456&Pid_b405
    When I try to point to the ezu***.sys or my .inf file, I get the  error "The specified location does not contain information about your hardware." 
    I don't think migrating to the cyu***.sys will improve my situation if I cannot even force the device to match to a driver.  Has anyone else encountered this problem? 

此错误消息指示INF文件没有添加VID/PID。
查找附加的INF文件，在其中添加了VID/PID。尝试这个INF文件。
当做，
高帕尔



     以下为原文
  This error message indicates that the inf file does not have your VID/PID added.
    Find attached the inf file in which I had added your VID/PID. Try this inf file.
    Regards,
    Gopal

Zip
1.4 K



     以下为原文
  

•   ezu***.inf.txt.zip 1.4 K  
  
  

嗨，高帕尔，
谢谢.INF文件。我的.INF文件（附件）中有VID/PID。我用我的.INF文件或者你发给我的文件得到相同的信息。总是“无法安装此硬件”向导无法找到必要的软件。如果我试图指向驾驶员，我总是得到“指定的位置不包含关于硬件的信息”。还有其他建议吗？



     以下为原文
  Hi Gopal,
    Thanks for the .inf file.  My .inf file (attached) does have the VID/PID in it.  I get the same message using my .inf file or the one you sent me.  Always "Cannot Install this Hardware" the wizard cannot find the necessary software.  If I try to point to the driver I always get "The specified location does not contain information about your hardware."  Any other suggestions?

卡米尔
你使用的是32位还是64位的XP？？
当做，
阿南德



     以下为原文
  Camille,
    Are you using a 32-bit or 64-bit XP??
    Regards,
    Anand

32位。



     以下为原文
  32-bit. 

卡米尔
请在这里发布您的INF文件。
我想看看它。
当做，
阿南德



     以下为原文
  Camille,
    Please post your inf file here.
    I would like to take a look at it.
    Regards,
    Anand

亲爱的各位，
我遇到了同样的问题。
IXE WXP 32位，当我将设备连接到PC时，设备管理器显示“未知设备”。然后对CysBiNF进行修改，并尝试加载它，它显示“指定的位置不包含关于硬件的信息”。
我的CysB.IF文件如下：
为WindowsXP的CyPress通用USB驱动程序安装INF；基于X86平台的处理器支持。（c）版权2011赛普拉斯半导体公司；
[Value]签名=“$Windows Nt$”类＝36FC9E60-C465-11CF-8056-2445 5354000 }提供程序= %Cy***l提供程序%CabraseCys= CysB.CAT驱动程序＝10/17 /2011，3.4.7.000
[源代码DISKSNAMES ] 1＝%CysBL安装%，
CysB.Sys= 1
[StudioDims] CysB.FieldExt＝10，Stase32驱动程序
[控制标志]排除选择> *
[制造商] %Cy***bValvices %=设备，NT，NTX86/NTAMD64
对于所有的平台[设备] %VIDY04B4＆PIDY1004. DeVice DeC%%CYUSB，USB VIDY04B4＆PIDY1004%VIDU04B4＆PIDY8613. DEVICESDESCC%= CYUSB，USB VIDY04B4和PIDY8613
；Windows 2000的非英特尔平台[装置。nt ] % vid_04b4 &；pid_1004。DeviceDesc % =适用于CYUSB，USB vid_04b4 &；pid_1004 % vid_04b4 &；pid_8613。DeviceDesc % =适用于CYUSB，USB vid_04b4 &；pid_8613
；在x86平台[装置。ntx86 ] % vid_04b4 &；pid_1004。DeviceDesc % =适用于CYUSB，USB vid_04b4 &；pid_1004 % vid_04b4 &；pid_8613。DeviceDesc % =适用于CYUSB，USB vid_04b4 &；pid_8613
；x64平台[装置。ntamd64 ] % vid_04b4 &；pid_1004。DeviceDesc % =适用于CYUSB，USB vid_04b4 &；pid_1004 % vid_04b4 &；pid_8613。DeviceDesc % =适用于CYUSB，USB vid_04b4 &；pid_8613
[ CyUSB ] CopyFrase= Cy***. Fiel.ExtAddiRg = Cy***. AdvReg
[CYUSB·HW] AdReGG＝Cy***. AdgRe.GuID
[CyUSB .Services ] AdvService＝CyUSB，2，CYUSB.AddService
[ CyUSB .NT ] CopyFix= Cy***.文件
[CyUSB，NT.HW] AdvReg＝Cy***. AdgRe.GuID
[CyUSB .nt.Services ] AdvService＝CyUSB，2，CYUSB.AddService
[ CyUSB .Ntx86] CopyFix= Cy***. Fiel.ExtAddiRg＝Cy***. AdvReg
[CyUSB，ntx86. HW] Addirg= Cy***. AdgRe.GuID
[CyUSB .Ntx86. Services ] AdvService＝CyUSB，2，CYUSB.AddService
[适用于CYUSB。ntamd64 ] cyu***.files.ext addreg cyu***.addreg声明= =
[CyUSB，nTAMD64.HW] Addirg= Cy***. AdgRe.GuID
[适用于CYUSB。ntamd64。服务] addservice =适用于CYUSB，2，CYUSB.AddService
[适用于CYUSB。addreg ]；贬-不要使用新的应用程序来确定一个适用于CYUSB驱动HKR，，DevLoader，，* ntkern HKR，，NTMPDriver，，CYUSB.sys；你可以任选包括检查你的应用程序来检查一个适用于CYUSB驱动，目前，DriverBase，CYUSB.sys HKR，“参数”，“maximumtransfersize”，0x100014096 HKR，“参数”、“DebugLevel”、0x10001,2 HKR，，，cyu***_description FriendlyName，% %
[适用于CYUSB。addservice ] DisplayName = % cyu***_description %服务类型= 1；service_kernel_driver StartType = 3；service_demand_start ErrorControl = 1；service_error_normal servicebinary = 10%  System32 司机 cyu***.sys addreg = cyu***.addreg loadordergroup =基础
[CyUSB文件.Ext] CysB.SyS
[CyUSB .Addig.GuID] HKR，DriverGUID，%CYUSB。GUID%
【弦】cyu***_provider =“柏”cyu***_company =“赛普拉斯半导体公司”cyu***_description =“柏通用USB驱动程序”cyu***_displayname =“Cypress的USB通用”cyu***_install =“柏适用于CYUSB驱动安装盘”vid_xxxx &；pid_xxxx。DeviceDesc =“Cypress的USB通用驱动程序（3.4.4.000）”vid_04b4 &；pid_8613。DeviceDesc =“Cypress FX2没有EEPROM（3.01.0000.2）”vid_04b4 &；pid_1004。DeviceDesc =“bulkloop装置”适用于CYUSB。GUID =“{ }”ae18aa60-7f6a-11d4-97dd-00010229b959 cyu***_unused =“”。



     以下为原文
  Dear All,
    I encountered the same issue.
    I use wxp 32bit, and when I connected the device to PC, the device manager displays "unknown device". Then I modified the cyu***.inf and tried to load it, it shows that ""The specified location does not contain information about your hardware".
    My cyu***.inf file is as the follow:
    ; Installation INF for the Cypress Generic USB Driver for Windows XP
; Processor support for x86 based platforms.
;
; (c) Copyright 2011 Cypress Semiconductor Corporation
;
    [Version]
Signature="$WINDOWS NT$"
Class=USB
ClassGUID={36FC9E60-C465-11CF-8056-444553540000}
provider=%CYUSB_Provider%
CatalogFile=CYUSB.cat
DriverVer=10/17/2011,3.4.7.000
    [SourceDisksNames]
1=%CYUSB_Install%,,,
    [SourceDisksFiles]
CYUSB.sys = 1
    [DestinationDirs]
CYUSB.Files.Ext = 10,System32Drivers
    [ControlFlags]
ExcludeFromSelect = *
    [Manufacturer]
%CYUSB_Provider%=Device,NT,NTx86,NTamd64
    ;for all platforms
[Device]
%VID_04B4&PID_1004.DeviceDesc%=CyU***, USBVID_04B4&PID_1004
%VID_04B4&PID_8613.DeviceDesc%=CyU***, USBVID_04B4&PID_8613
    ;for windows 2000 non intel platforms
[Device.NT]
%VID_04B4&PID_1004.DeviceDesc%=CyU***, USBVID_04B4&PID_1004
%VID_04B4&PID_8613.DeviceDesc%=CyU***, USBVID_04B4&PID_8613
   
;for x86 platforms
[Device.NTx86]
%VID_04B4&PID_1004.DeviceDesc%=CyU***, USBVID_04B4&PID_1004
%VID_04B4&PID_8613.DeviceDesc%=CyU***, USBVID_04B4&PID_8613
   
;for x64 platforms
[Device.NTamd64]
%VID_04B4&PID_1004.DeviceDesc%=CyU***, USBVID_04B4&PID_1004
%VID_04B4&PID_8613.DeviceDesc%=CyU***, USBVID_04B4&PID_8613
   
[CYUSB]
CopyFiles=CYUSB.Files.Ext
AddReg=CyU***.AddReg
    [CYUSB.HW]
AddReg=CYUSB.AddReg.Guid
    [CYUSB.Services]
Addservice = CYUSB,2,CYUSB.AddService
    [CYUSB.NT]
CopyFiles=CYUSB.Files.Ext
AddReg=CyU***.AddReg
    [CYUSB.NT.HW]
AddReg=CYUSB.AddReg.Guid
    [CYUSB.NT.Services]
Addservice = CYUSB,2,CYUSB.AddService
   
[CYUSB.NTx86]
CopyFiles=CYUSB.Files.Ext
AddReg=CyU***.AddReg
    [CYUSB.NTx86.HW]
AddReg=CYUSB.AddReg.Guid
    [CYUSB.NTx86.Services]
Addservice = CYUSB,2,CYUSB.AddService
    [CYUSB.NTamd64]
CopyFiles=CYUSB.Files.Ext
AddReg=CyU***.AddReg
    [CYUSB.NTamd64.HW]
AddReg=CYUSB.AddReg.Guid
    [CYUSB.NTamd64.Services]
Addservice = CYUSB,2,CYUSB.AddService
   
[CYUSB.AddReg]
; Deprecating - do not use in new apps to identify a CYUSB driver
HKR,,DevLoader,,*ntkern
HKR,,NTMPDriver,,CYUSB.sys
; You may optionally include a check for DriverBase in your application to check for a CYUSB driver
HKR,,DriverBase,,CYUSB.sys
HKR,"Parameters","MaximumTransferSize",0x10001,4096
HKR,"Parameters","DebugLevel",0x10001,2
HKR,,FriendlyName,,%CYUSB_Description%
    [CYUSB.AddService]
DisplayName    = %CYUSB_Description%
ServiceType    = 1                  ; SERVICE_KERNEL_DRIVER
StartType      = 3                  ; SERVICE_DEMAND_START
ErrorControl   = 1                  ; SERVICE_ERROR_NORMAL
ServiceBinary  = %10%System32DriversCYUSB.sys
AddReg         = CYUSB.AddReg
LoadOrderGroup = Base
    [CYUSB.Files.Ext]
CYUSB.sys
    [CYUSB.AddReg.Guid]
HKR,,DriverGUID,,%CYUSB.GUID%
    [Strings]
CYUSB_Provider    = "Cypress"
CYUSB_Company     = "Cypress Semiconductor Corporation"
CYUSB_Description = "Cypress Generic USB Driver"
CYUSB_DisplayName = "Cypress USB Generic"
CYUSB_Install     = "Cypress CYUSB Driver Installation Disk"
VID_XXXX&PID_XXXX.DeviceDesc="Cypress USB Generic Driver (3.4.4.000)"
VID_04B4&PID_8613.DeviceDesc="Cypress FX2 - No EEPROM (3.01.0000.2)"
VID_04B4&PID_1004.DeviceDesc="Bulkloop Device"
CYUSB.GUID="{AE18AA60-7F6A-11d4-97DD-00010229B959}"
CYUSB_Unused      = "."
 

请看其他ththHTTP://www. CyPress。APP=论坛和ID；ID = 167和；RID＝56711，您已经创建。让我们在那边讨论一下。
当做，
阿南德



     以下为原文
  Please look at the other thread http://www.cypress.com/?app=forum&id=167&rID=56711 you've created. Let us discuss this over there.
    Regards,
    Anand