有人成功将嵌入式PSoC 3或PSoC 5设备应用到生产构建中吗

嗨，肯尼，
出于生产的目的，我们有一个认证的第三方程序员在赛普拉斯网站上支持PSoC 3编程。但是他们只能从他们自己的程序员GUI编程PSoC 3。唯一可以从PSoC Creator环境中使用的程序员/调试器是在FTK，-030 DVK中支持的MIXPRO3和FX2LP。PSoC Creator现在还不支持第三方程序员或调试器从其环境中获得支持。
话虽如此，我已经为PSoC 1开发了一种PSoC 3版本的HSSP应用说明（AN44 168是PSoC 1 HSSP）。该项目将使用PSoC 5作为主机来编程PSoC 3。它遵循AN623 91中提到的编程规范。我们将在本月底之前发布。如果你想早点拷贝，请将你的电子邮件ID详细信息发送到“VVSK@ CyPress网站”（它是2 V，而不是电子邮件ID中的W）。我可以把草稿给你，项目。
关于PSOC 3编程的硬件连接，请参阅AN62691。AN64 359相当于PSoC 5。希望这有帮助。如果你有进一步的问题，请告诉我。
谢谢，
维韦克



     以下为原文
  Hi Kenny,
    For production purposes, we have a list of certified third party Programmers on Cypress website that support PSoC 3 programming. But they can only program PSoC 3 from their own Programmer GUI. The only Programmer/Debuggers which can be used from PSoC Creator environment is Miniprog3 and FX2LP based one  supported in FTK's, -030 DVK's. PSoC Creator right now is not yet supporting third party PRogrammer or Debugger from its environment.
    Having said that, I have developed a PSoC 3 version of HSSP Application note for PSoC 1 (AN44168 is PSoC 1 HSSP). This project will use PSoC 5 as a Host to program PSoC 3. It follows the Programming specifications mentioned in AN62391. We will be releasing it before end of this month. If you want a copy earlier, please send your email id details to "VVSK@CYPRESS.COM" (it is 2 V's and not W in email id :) ). I can send you the draft document, project.
    Regarding the hardware connections for PRogramming PSoC 3, refer AN62391. AN64359 is equivalent for PSoC 5. Hope this helps. Let me know if you have further questions.
    Thanks,
    Vivek
   

你也可以参考应用笔记AN61291在HTTP://wwwyCysP.com／？RID＝43337连接器详细信息。



     以下为原文
  You can also refer to application note AN61291 at http://www.cypress.com/?rID=43337 for connector details.

对不起，这是打字错误。一个数字是AN61290：硬件启动指南与PSoC Creator。第4、5页讨论编程、调试接口。



     以下为原文
  Sorry it is a typo. The AN number is AN61290:Hardware starting guide with PSoC Creator. Pages.4,5 talk about Programming, Debug interfaces.

谢谢你的回复。
我将阅读你提到的申请说明：



     以下为原文
   Thanks for the replies.
    I shall read the application notes you mentioned :-)