Vivado中缺少Zcu102板但它在HLS中存在

使用最新版本的vivado。
你可以找到所有的板子
谢谢和RegardsBalkrishan -----------------------------------------------
---------------------------------------------请将帖子标记为
一个答案“接受为解决方案”，以防它有助于解决您的查询。如果一个帖子引导到解决方案，请给予赞誉。



以下为原文

use the latest version of vivado. You can find all the boards 
Thanks and Regards
Balkrishan
--------------------------------------------------------------------------------------------
Please mark the post as an answer "Accept as solution" in case it helped resolve your query.
Give kudos in case a post in case it guided to the solution.

我们需要为2016.2版本本身修复它以使用ad9361参考设计。



以下为原文

We need to get it fixed for 2016.2 version itself to use the ad9361 reference design.

你好@ maganuru，
我相信这与XCZU9EG-ES1部分有关？
如果是这样，即使您没有在2016.2中添加此板，您是否可以在“部件”部分下看到并找到XCZU9EG-ES1 / EVAL设备？
如果没有，即使您设置了init.tcl，也需要有效的EA / ES许可证才能在Vivado中启用此功能。
您能否确认您拥有有效的许可证并且在此机器上设置正确？
Vivado可能无法检测到有效的EA / ES许可证，如果没有它，2016年无法为您启用所需的ES / Eval设备。
你能确认吗？
谢谢。
问候，
阿纳托利
亲切的问候，Anatoli Curran，Xilinx威廉希尔官方网站 支持-----------------------------------------
--------------------------------不要忘记回复，工作，并接受解决方案.----
--------------------------------------------------
-------------------



以下为原文

Hello @maganuru,
 
I believe this is in relation to the XCZU9EG-ES1 part? If so, even if you don't have this board added in 2016.2, can you actually see and find XCZU9EG-ES1/EVAL devices under the "Parts" section?
If not, even if you have your init.tcl set, you'd also need a valid EA/ES license to get this enabled in Vivado. Can you please confirm that you do have a valid license and also it is set correctly on this machine? There could be possibility that Vivado can't detect a valid EA/ES license and without it, the required ES/Eval device can't be enabled for you in 2016.2. Can you confirm on this please? Thanks.
 
Regards,
Anatoli 
Kind Regards,
Anatoli Curran,
Xilinx Technical Support
-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------

你好，
我正在使用最后一个vivado版本，我还兑换了我的许可证凭证（许可证经理没问题），但ZCU102仍然缺少vivado的主板，并不是所有zynq超级设备部件都可用
是否必须升级vivado？
提前致谢



以下为原文

Hello,
I'm using the last vivado version and I also redeemed my license voucher (license manager is ok), but the ZCU102 is still missing into vivado's boards and are not available all zynq ultrascale device parts
Is necessary an upgrade of vivado?
 
thanks in advance

你好@ assiro，
您可能已安装Vivado WebPACK版本的安装，而不是Vivado System或Design版本。
如果是这种情况，请将您的Vivado升级到VivadoSystem或Design版本，这应该可以解决这个问题。
亲切的问候，Anatoli Curran，Xilinx威廉希尔官方网站 支持-----------------------------------------
--------------------------------不要忘记回复，工作，并接受解决方案.----
--------------------------------------------------
-------------------



以下为原文

Hello @assiro,
 
You may have installed Vivado WebPACK edition of the installation rather than Vivado System or Design edition. If that is the case, please upgrade your Vivado to either Vivado System or Design edition, and this should fix this issue for you.
Kind Regards,
Anatoli Curran,
Xilinx Technical Support
-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------