不能在表面4窗口10上运行vulkan

Hello_tyoc213_，我知道你在运行“vulkaninfo”应用程序时收到Vulkan的错误消息。关于这一点，我正在现场测试问题，我能够找到一个我们可以尝试的解决方案。
我可以确认这是成功修复了错误，因为我也得到了它。
请尝试使用干净的驱动程序安装，让我们按照以下步骤开始：1 - 从https://downloadcenter.intel.com/download/27988/Intel-Graphics-Driver-for-Windows-10下载.zip驱动程序？
product = 883552 - 断开计算机与Internet的连接.3 - 转到设备管理器并在显示适配器下查看.4 - 右键单击​​英特尔®集成显卡，选择卸载并继续操作，直到只有Microsoft的基本显示适配器
.5 - 解压缩您之前下载的文件.6 - 右键单击​​Microsoft的基本显示适配器并选择“更新驱动程序”.7 - 选择“浏览计算机以查找驱动程序软件”.8 - 选择选项“我选择
从我计算机上的设备驱动程序列表“.9 - 选择”有磁盘“选项.10 - 选择”浏览“选项.11 - 访问解压缩下载驱动程序的指定位置或文件夹，并访问名为”
图形“.12 - 选择设置信息文件（通常命名为”id
glh64“或”igdlh“）。13 - 单击打开然后单击确定，最后单击下一步，驱动程序将开始安装.14 - 安装完成后重新启动计算机。完成此操作后运行”vulkaninfo“
“它不应该再给你错误了。我希望这会有所帮助。大卫V.



以下为原文

Hello _tyoc213_,

I understand that you are getting an error message with Vulkan when running the "vulkaninfo" application. 

Regarding this, I was testing the problem myself on-site and I was able to find a solution which we can try. I can confirm that this successfully fixed the error since I was getting it as well. Please try with a clean driver installation, lets start by following the steps below: 

1 - Download the .zip driver from https://downloadcenter.intel.com/download/27988/Intel-Graphics-Driver-for-Windows-10?product=88355
2 - Disconnect the computer from the internet. 
3 - Go to device manager and check under display adapters.
4 - Right-click on the Intel ® Integrated Graphics, select the option uninstall and keep going until you only have Microsoft's basic display adapter.
5 - Unzip the file you downloaded previously.
6 - Right-click on the Microsoft's basic display adapter and select "Update driver".
7 - Select the option "Browse my computer for driver software.
8 - Select the option "Let me pick from a list of device drivers on my computer". 
9 - Select the option "Have disk".
10 - Select the option "Browse".
11 - Access the designated location or folder where you unzipped the driver downloaded and access a folder called "Graphics". 
12 - Select the setup information file (Typically named either "idglh64" or "igdlh").
13 - Click on open and then click OK, finally click Next and the drivers will begin to install. 
14 - Reboot your computer when the installation is completed.

After this is completed and you run the "vulkaninfo" it should not give you the error anymore. 

I hope this helps.


Regards,
David V

很好，我从一开始就有这个问题，很高兴现在有一个解决方案。
不知道windows的未来更新是否会正确安装。
但是现在谢谢！



以下为原文

Nice, I have this problem since start, nice to ahve a solution now.
 
Dont know if future updates of windows will install it correctly or not. But thanks for now!