MPLAB X IDE上的多个项目

由于工作在3，或更多，同时项目，因为我的电子板有超过3微，连接在一起的BI I2C总线，而且我经常需要跳转从一个项目到另一个，以便转移在每个微处理器的修改。现在我最断开和重新连接ICD3 CON每个微控制器，但我不想从我的项目转到另一个。现在我继续打开所有的项目，设置当前的主项目，但经常当我打开一个源（在每个项目中，直到10个文件）他的选项卡将追加在顶部酒吧附近的最后一个开的。目前还不清楚，当我从文件跳转到其他文件时，VRUN文件是可能的。有些文件有相同的名称……还有其他的方法来做这件事，比如打开更多的MPLAB，或者设置它让标签正确地放在上面？



      以下为原文

    I need to work on 3, or more, project at the same time because my electronic board has more than 3 micro, connected together bi I2C bus, and frequently i need to jump from a project to other one in order to transfer the modifies in each microprocessor.
Now i most disconnect and reconnect the ICD3 connector by each microcontroller, but i wouldn't like to gouot from my project to operning other one.
Now i keep open all the projects, setting the current like main project, but frequently when i open one source (in each projet there are till 10 files) his tab will appare on top bar near the last one opened. It is not clear, and when i jump from file to other file is possible to vrong file. Some files have same name...
There is other metod to do this, like open more of MPLAB, or setting it to have the tab alligned correctly on top?