TMR1辅助振荡器报错

第二次尝试发布这个消息，不确定我的第一个发生了什么，因为它没有出现在论坛上。我有一个劳拉湾项目成功使用18LF46K22使用MCC和库版本1.45。系统时钟是使用内部振荡器，我有一个32.768 kHz晶体DRI。在第二个振荡器上设置定时器1。当我尝试使用一个新的库（155，165.1和165.2）时，我会抱怨一个错误，我需要连接T1CKI引脚。如果我确实需要并连接PIN，它就要求它正确地抱怨次级振荡器所需要的SOSCO引脚。我用一个定时器1和二次振荡器创建了一个裸露的项目，我也遇到了同样的问题。马克在新图书馆工作。



      以下为原文

    Second attempt at posting this message, not sure what happened to my first one as it didn't show up in the forum.

I have a Lorawan project which works successfully using a 18LF46K22 using MCC and Library version 1.45

The system clock is using the internal oscillator and I have a 32.768khz crystal driving Timer 1 on the secondary oscillator.

When I try and use a newer library (155, 165.1 and 165.2) I get an error complaining that I need to connect the T1CKI pin.

As per the datasheet the T1CKI pin is not used when the secondary oscillator is used. If I do oblige and connect the pin it asks for it then correctly complains about the SOSCO pin which is needed for the secondary oscillator.

I have created a bare bones project with just the Timer 1 and secondary oscillator and I get the same problem.

Has anybody else managed to get the secondary oscillator working on the newer libraries.

Mark