34461A Min-Max不适用于34401A

您好，34401A已不再在加拿大上市。
我们需要更换和使用34461A作为替代品，我们在峰峰值测量方面遇到了麻烦（我们正在使用labview）。
我们在读取通信线路时使用峰峰值选项以获得最小值和最大值。
代码：Visa写入34410A CONF：VOLT：AC VOLT：AC：PEAK：STAT ON INIT FETC？
Visa Read Visa写FETC：VOLT：AC：PTP？
Visa Read此代码不再适用于34461A。
读AC只会给出RMS值。
我们真的不关心如何获得通信通道的最小 - 最大值，只要它在一个可观的时间（最多10秒......）。
用DC读取信号几乎保持在0V左右。
通信信号为±100mv。
我们验证最小 - 最大范围约为200mV。
谢谢



     以下为原文

  Hello,

The 34401A is not longer available in Canada. We need to change and use the 34461A as a replacement and we are having trouble with the peak-to-peak measurements (We are using LabVIEW).

We use the peak-to-peak option while reading a communication line in order to get the min and max values. The code:

Visa Write

34410A
CONF:VOLT:AC
VOLT:AC:PEAK:STAT ON
INIT
FETC?

Visa Read

Visa Write

FETC:VOLT:AC:PTP?

Visa Read

This code no longer works with the 34461A. Reading the AC will only give the RMS values. We dont really care how to get the min-max of the communication channel, as long as it is in a respectable time (10s at most...). Reading the signal with DC pretty much stays around the 0V. The communication signal is ±100mv. We verify the min-max range to be around 200mV.

Thanks