在哪里可以找到GPIF Error 1005的含义？

你好，杰夫，
关于错误1005：
-如果您看到FX3 TRM的第10.8节，PPyError寄存器给出GPIF和PIB错误。
如果您检查CYU3PIBR.H对于CYU3pPIBRRORYPE类型，那么您会发现数字5对应于CYU3PYPIGRYR THRO0XWRY溢出，并且如果您在同一个文件（CYU3PIB.H）中检查CYU3PGPIFError类型，那么您可以看到0x1000对应于CYU3PGPIFIFRelyDATAWRADEVER Err。
在固件中，假设您已经注册了PiBrror回调如下：
CYU3PPIBRealStestCalbCub（GPIFIE ErrRoRyCB，0xFFFF）；
然后在回调函数空隙gpIFyErrRoRoCB中（CYU3pPIN TrrType CBType，UTI1616T CBARG）
CBARG将给您两个PIbjErrEx代码和gpIFyErrEx代码——因此，在您的情况下，GPIF错误告诉写入到DMA数据线程，该线程尚未准备好，PIB错误告诉“写入溢出（写超过可用缓冲区大小））在一个线程0套接字上出错。
当做，
血竭



     以下为原文
  Hello Jeff,
 
Regarding the error 1005:
- If you see the section 10.8.7 of FX3 TRM, PP_ERROR register gives the GPIF and the PIB error.
- If you check the cyu3pib.h for CyU3PPibErrorType, then you will find that number 5 corresponds to CYU3P_PIB_ERR_THR0_WR_OVERRUN and if you check CyU3PGpifErrorType in the same file (cyu3pib.h) then you can see that 0x1000 corresponds to CYU3P_GPIF_ERR_DATA_WRITE_ERR.
 
- In the firmware let's say you have registered the piberror callback as follows:
CyU3PPibRegisterCallback(gpif_error_cb,0xffff);
 
Then in the callback function - void gpif_error_cb(CyU3PPibIntrType cbType, uint16_t cbArg)
 
The cbArg - will give you both PIB_ERR_CODE and GPIF_ERR_CODE - so in your case, the GPIF error tells Write to DMA data thread which is not ready and the PIB error tells "Write overrun (write beyond available buffer size) error on one of the Thread 0 sockets."
 
Regards,
Hemanth