完善资料让更多小伙伴认识你,还能领取20积分哦, 立即完善>
嗨,我正在尝试在Juma Canon中配置osxmotion库。我能够在项目中成功导入motionar,motionfx,motioncp,motiongr库,但无法正确执行许可证管理器。我正在附加视频链接 -
https://www.youtube.com/watch?v=v35_pLUQQlU 。请帮帮我。 #STM32f401 #library #ARM#compile-license 以上来自于谷歌翻译 以下为原文 Hi, I am trying to configure osxmotion library in Juma Canon. I was able to successfully import motionar,motionfx,motioncp,motiongr library in the project but was unable to properly execute the license manager. I am attaching the video link- https://www.youtube.com/watch?v=v35_pLUQQlU . Please help me out. #stm32f401 #library #arm #compile-license |
|
相关推荐
2个回答
|
|
嗨,不幸的是我对佳能Juma没有任何经验。但有人认为我不清楚。你在变量osx_mar_license [3] [4],osx_mcp_license [3] [4]中硬编码了许可证,但是你试图从闪存中的某个地方加载许可证。为什么?我会跳过InitLicenseManager()函数并直接调用每个库的init函数。它将使用硬编码许可证,它应该工作。
以上来自于谷歌翻译 以下为原文 Hi, unfortunately I don't have any experience with Canon Juma. But one think is not clear to me. You hard coded the licenses in the variables osx_mar_license[3][4], osx_mcp_license[3][4], ... but then you are trying to load the licenses from some place in flash. Why? I would skip the InitLicenseManager() function and call the init function for each library directly. It will use the hard coded licenses and it should work. |
|
|
|
|
|
|
|
只有小组成员才能发言,加入小组>>
请教:在使用UDE STK时,单片机使用SPC560D30L1,在配置文件怎么设置或选择?里面只有SPC560D40的选项
3020 浏览 1 评论
3333 浏览 1 评论
请问是否有通过UART连接的两个微处理器之间实现双向值交换的方法?
1915 浏览 1 评论
3774 浏览 6 评论
6198 浏览 21 评论
STM32H7打开DCache后,出现了串口接收信息为空的现象,是哪里出了问题?
81浏览 5评论
用NANO STM32F103RBT6的开发板烧录不了是哪里出了问题?
98浏览 5评论
120浏览 5评论
外部中断触发类型为双边沿触发,进入中断回调后有什么办法判断该边沿是上升沿还是下降沿?
85浏览 5评论
STM32L071CBT6低温环境下无法正常工作是什么原因引起的?
92浏览 5评论
小黑屋| 手机版| Archiver| 电子发烧友 ( 湘ICP备2023018690号 )
GMT+8, 2025-4-28 15:05 , Processed in 1.061347 second(s), Total 79, Slave 63 queries .
Powered by 电子发烧友网
© 2015 bbs.elecfans.com
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 湖南华秋数字科技有限公司
电子发烧友 (电路图) 湘公网安备 43011202000918 号 电信与信息服务业务经营许可证:合字B2-20210191