如何配置MIPI时钟

我一直与CX3实现USB摄像头，我有狮子座盒试试我的修改。这些是我以前的文章：1和2。
现在的问题是实现一切工作正确的MIPI配置。问题是，我没有足够的信息来更改设置。
我试图与索尼imx219pq工作，这些参数：
MIPI CSI时钟= 1368 mhzths准备= 47ths零= = = = 87hblanking 1528vblanking 683refclk 19.2 mhzsince这些价值观导致可能的范围内，我已经修改了他们的零= 10 hblanking = 20 vblanking = 200。
但是CX3接收机配置应用程序总是显示错误：
由于价值观是在正确的范围内，我不知道我为什么会得到这个错误。
该值在左侧有什么用（MIPI csi2输入图像传感器）如果从右边部分得到了正在使用的（CX3 MIPI接口配置）？
为什么会出现错误？
为什么一个大hblanking值产生较大的输出像素时钟的最小值？



     以下为原文
  I have been working with CX3 to implement a USB camera, and I have the Denebola kit to try my modifications. These are my previous posts: #1 and #2.

The problem right now is to achieve the correct MIPI configuration for everything to work. The problem is, I don't have enough information to change the settings.
I am trying to work with a Sony IMX219PQ, with these parameters:

• MIPI CSI clock = 1368 MHz
• THS prepare = 47
• THS zero = 87
• Hblanking = 1528
• Vblanking = 683
• REFCLK = 19.2 MHz
  

Since these values lead to impossible ranges, I have modified them: THS zero = 100, Hblanking = 200, Vblanking = 200.
But the CX3 Receiver Configuration application always shows an error:

Since the values are in the right ranges, I don't know why am I getting this error.

What is the use of the values on the left side (MIPI CSI2 Inputs From Image Sensor) if the ones that are being used are obtained from the right section (CX3 MIPI Interface Configuration)?
Why does that error shows up?
Why does a larger Hblanking value leads to a larger Output Pixel Clock min value?