本帖最后由 rj496631097 于 2017-5-2 14:11 编辑
3楼：这是android6.0在emmc中启动过程中的log输出：
INFO: Configuring SPC Controller
NOTICE: BL3-1: v1.0(debug):9578c83
NOTICE: BL3-1: Built : 09:46:40, Sep 7 2016
NOTICE: BL3-1 commit: 9578c8321468250ff68604cf84c19e662a9080ec
INFO: BL3-1: Initializing runtime services
ERROR: Error initializing runtime service tspd_fast
INFO: BL3-1: Preparing for EL3 exit to normal world
INFO: BL3-1: Next image address = 0x4a000000
INFO: BL3-1: Next image spsr = 0x1d3
[SCP] :sunxi-arisc driver begin startup 2
[SCP] :arisc_para size:240
[SCP] :arisc version: [v0.1.94]
[SCP] :sunxi-arisc driver v1.10 is starting
no battery, limit to dc
no uart input
DRAM:
In: Out: Err: update dtb dram start
update dtb dram end
()
[ 2.274]inter uboot shell
read partition: boot or recovery
INFO: BL3-1: Next image address = 0x41080000
INFO: BL3-1: Next image spsr = 0x3c5
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.10.65 (justin@justin-OptiPlex-3010) (gcc version 4.9.3 20150113 (prerelease) (Linaro GCC 4.9-2015.01-3) ) #1 SMP PREEMPT Wed Jan 4 18:11:14 CST 2017
[ 0.000000] CPU: AArch64 Processor [410fd034] revision 4
[ 0.000000] Machine: sun50iw1p1
[ 0.000000] bootconsole [earlycon0] enabled
[ 0.000000] cma: CMA: reserved 256 MiB at b0000000
[ 0.000000] On node 0 totalpages: 520192
[ 0.000000] DMA zone: 7112 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 520192 pages, LIFO batch:31
[ 0.000000] script_init enter!
[ 0.000000] script_init exit!
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv0.2 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] PERCPU: Embedded 12 pages/cpu @ffffffc06ef7b000 s20288 r8192 d20672 u49152
[ 0.000000] pcpu-alloc: s20288 r8192 d20672 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 513080
[ 0.000000] Kernel command line: earlyprintk=sunxi-uart,0x01c28000 initcall_debug=0 console=ttyS0,115200 loglevel=8 root=/dev/mmcblk0p7 init=/init partitions=bootloader@mmcblk0p2:env@mmcblk0p5:boot@mmcblk0p6:system@mmcblk0p7:verity_block@mmcblk0p8:misc@mmcblk0p9:recovery@mmcblk0p10:cache@mmcblk0p11:metadata@mmcblk0p12:private@mmcblk0p13:frp@mmcblk0p14:empty@mmcblk0p15:alog@mmcblk0p16:media_data@mmcblk0p17:UDISK@mmcblk0p1 cma=256M androidboot.selinux=enforcing androidboot.serialno=0410503444100c16088e androidboot.hardware=sun50iw1p1 boot_type=2 androidboot.verifiedbootstate= androidboot.sunxi_rotpk=
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Memory: 2032MB = 2032MB total
[ 0.000000] Memory: 1767024k/1767024k available, 313744k reserved
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbbffff0000 (245759 MB)
[ 0.000000] vmemmap : 0xffffffbc00e38000 - 0xffffffbc02a00000 ( 27 MB)
[ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc07f000000 ( 2032 MB)
[ 0.000000] .init : 0xffffffc000a1a000 - 0xffffffc000a9ff40 ( 536 kB)
[ 0.000000] .text : 0xffffffc000080000 - 0xffffffc000a197b4 ( 9830 kB)
[ 0.000000] .data : 0xffffffc000aa0000 - 0xffffffc000b5ab98 ( 747 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (virt).
[ 0.000000] Console: colour dummy device 80x25
[ 0.010000] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[ 0.012454] pid_max: default: 32768 minimum: 301
[ 0.017408] Security Framework initialized
[ 0.020018] SELinux: Initializing.
[ 0.023556] SELinux: Starting in permissive mode
[ 0.028287] Mount-cache hash table entries: 256
[ 0.0318
66] Initializing cgrou
p subsys deb
ug
[ 0.034179] Init
ializing cgr
oup subsys freezer
[
0.038701]
ftrace: allocating 256
52 entries i
n 101 pages
[ 0.060773] CPU0: update cpu_power 1968128
[ 0.060808] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available
[ 0.068846] virtual base = 0xffffff800000a000.
[ 0.070023] gicd_base = 0xffffff800000c000.
[ 0.074162] gicc_base = 0xffffff80
0000e000.
[ 0.010000] CPU1: Booted sec
ondary processor
[ 0.010000] CPU1: update cpu_power 1968128
[ 0.010000] CPU2: Booted secondary
processor
[ 0.010000] CPU2: update cpu_power 1968128
[ 0.0100
00] CPU3: Booted secondary processor
[ 0.010000] CPU3: update cpu_power 1968128
[ 0.0
81330] Brought up 4 CPUs
[ 0.090010] SMP: Total of 4 processors activated (1
92.00 BogoMIPS).
[ 0.096926] devtmpfs: initialized
[ 0.126278] atomic64 test passed
[ 0.126278] pinctrl core: initialized pinctrl subsystem
[ 0.137595] NET: Registered protocol family 16
[ 0.140277] script_sysfs_init success
[ 0.141865] dump_class_init,806, success
[ 0.141865] vdso: 2 pages (1 code, 1 data) at base ffffffc000aa5000
[ 0.15
0032] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.157899] software
IO TLB [mem 0xad000000-0xad400000] (4MB) mapped at [ffffffc06c000000-ffffffc06c3fffff]
[
0.160739] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.165658] axp81x_board_init: axp
regl_devs num = 23
[ 0.170178] pll_audio-set_default_rate=24576000 success!
[ 0.175
037] pll_video0-set_default_rate=297000000 success!
[ 0.180106] pll_video1-set
_default_rate=297000000 success!
[ 0.1854
64] pll_de-set_default_rate=297000000 success!
[ 0.190
319] ahb1-set_default_rate=200000000 success!
[ 0.195741] de-set_default_source=pll_de success!
[ 0.199464]
de-set_default_rate=297000000 succ
ess!
[ 0.200063] tcon0-set_defa
ult_source=pll_mipi success!
[ 0.205066] t
con1-set_default_source=pll_video0
success!
[ 0.210324] hdmi-set_
default_source=pll_vide
o0 success!
[ 0.217162] sun50i-
r-pinctrl 1f02c00.pinctrl: initial
ized sunXi PIO driver
[
0.220335] [sun50iw1
p1_pinctrl_probe][837]
[ 0.2261
54] sun50i-pinctrl 1c2
0800.pinctrl: initializ
ed sunXi PIO driver
[ 0.230525]
sunxi hwspinlock vbase
:0xffffff800005c000
[ 0.250337] sunxi_chipid_probe,190: soc bin:0
[ 0.310359] bio: create slab at 0
[ 0.311009] pwm module init!
[ 0.311100] SCSI subsystem initialized
[ 0.311100] u***core: registered new interface driver u***fs
[ 0.320118] u***core: registered new interface driver hub
[ 0.325111] u***core: registered new device driver u***
[ 0.330574] Linux video capture interface: v2.00
[ 0.332778] [ARISC] :sunxi-arisc driver v1.1
0
[
0.350401] [ARISC] :sunxi-arisc driver v1.10 startup succeeded
[ 0.350582] Advanced Linux Sound Architecture Driver Initialized.
[ 0.360368] Bluetoo
th: Core ver 2.16
[ 0.362424] NET: Registered protocol family 31
[ 0.36416
3] Bluetooth: HCI device and connection manager initialized
[ 0.370036] Blue
tooth: HCI socket layer initialized
[ 0.374
790] Bluetooth: L2CAP socket layer initialize
d
[ 0.379766] Bluetooth: SCO socket layer i
nitialized
[ 0.380521] cfg80211: Calling C
RDA to update world regulatory domain
[ 0.
385656] [pm]aw_pm_init!
[ 0.385656] rtc ph
ysical base = 0x0000000001f00000 .
[ 0.390049] np nam
e = /soc@01c00000/rtc@0
1f00000.
[ 0.39468
5] base = ffffff800006c
100, len = 4.
[ 0.398948] pmu n
ame: pmu0 .
[ 0.400
049] pmu0_enable = 0x1.
[ 0.403066] pmux_
id = 0x6.
[ 0.4057
96] pmux_twi_id = 0x1.
[ 0.408865] pmux_t
wi_addr = 0x34.
[
0.410008] pmu name: pmu
1 .
[ 0.412864] Warning: can no
t find np for pmu1.
[
0.417488] add_sys_p
wr_dm: get ldo name fo
r id: vcc-lpddr failed
[ 0.420156] after i
nited: sys_m
ask config = 0x4a55.
[ 0.424878] Warning:
can not find np for dy
namic_standby_para.
[
0.430140] [pm]valid
[ 0.432213] [pm]va
lid
[ 0.434430] Noti
ce: sun9i&sun8iw5&sun50
i not need support norm
al standby, change
to super standby.
[
0.440417]
Switching to clocksourc
e arch_sys_c
ounter
[ 0.482427] FS-Cache: Loaded
[ 0.483038] CacheFiles: Loaded
[ 0.510279] NET: Registered protocol family 2
[ 0.511768] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.516386] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.523102] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.530358] TCP: reno registered
[ 0.532460] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.538382] UDP-Lite hash table entries: 1024 (order: 3, 32768 b
ytes)
[ 0.545713] NET: Registered protocol family 1
[ 0.550189] Unpacking
initramfs...
[ 0.810325] Freeing initrd memory: 4892K (ffffffc001000000 - ffffffc0014c7000)
[ 0.813896] lock super standby defaultly!
[ 0.815872] lookup_scene_lock_name: new scene lock super_standby
[ 0.821903] scene_lock_init name=super_standby
[ 0.826231] scene_lock: super_standby, type 5, count 1
[ 0.832735] audit: initializing netlink socket (disabled)
[ 0.836794] type=2000 audit(0.830:1): initialized
[ 0.846272] NTFS driver 2.1.30 [Flags: R/W].
[ 0.846532] fuse init (API version 7.22)
[ 0.850793] msgmni has been set to 3972
[ 0.853488] SELinux: Registering netfilter hooks
[ 0.858875]
[ 0.858875] TEE C
ore Framework initialization (ver 1:0.1)
[ 0.865030] TEE armv7 Driver initialization
[ 0.869882]
tz_tee_probe: name="armv7sec", id=0, pdev_name="armv7sec.0"
[ 0.875725] TEE core: Alloc
the misc device "opteearmtz00" (id=0)
[ 0.882186] TEE Core: Register the misc device "opteearmtz00
" (id=0,minor=60)
[ 0.890114] NET: Register
ed protocol family 38
[ 0.893303] io sched
uler noop registered
[ 0.897080] io schedu
ler deadline registered
[ 0.901575] io sch
eduler cfq registered (default)
[ 0.908170
] uart0: ttyS0 at MMIO 0x1c28000 (i
rq = 32) is a SUNXI
[ 0.912131] sw_console
_setup()1173 - console
setup baud 115200 parit
y n bits 8, flow n
[
0.920090] console [
ttyS0] enabled, bootconsole dis
abled
[ 0.920090]
console [ttyS0] enabled
, bootconsole disabled
[ 0.932
425] uart1: ttyS1 at
MMIO 0x1c28400 (irq
= 33) is a SUNXI
[ 0.944493]
misc dump
reg init
[ 0.955648] loop: module loaded
[ 0.959417] sunxi-bt bt.29: bt_power_name (vcc-wifi)
[ 0.965013] sunxi-bt bt.29: io_regulator_name (vcc-wifi-io)
[ 0.971243] sunxi-bt bt.29: bt_rst gpio=356 mul-sel=1 pull=-1 drv_level=-1 data=0
[ 0.980335] sunxi-bt bt.29: block state already is 1
[ 0.986320] sunxi-wlan wlan.28: wlan_busnum (1)
[ 0.991368] sunxi-wlan wlan.28: wlan_power_name (vcc-wifi)
[ 0.997361] sunxi-wlan wlan.28: i
o_regulator_name (vc
c-wifi-io)
[ 1.00
4063] sunxi-wlan wla
n.28: wlan_regon gpio
=354 mul-sel=1 pull
=-1 drv_level=-1 da
ta=0
[
1.013567] sunxi-wla
n wlan.28: wlan_hostw
ake gpio=3
55 mul-sel=6 pull=-
1 drv_level=-1 data
=0
[
1.026590] tun: Univ
ersal TUN/TAP device
driver, 1.
6
[ 1.032218] tu
n: (C) 1999
-2004 Max Krasnyansk
y <maxk@qualcomm.com>
[ 1.
040273] WARNING: Get
ephy clock is failed
[
1.046437]
PPP generic driver ve
rsion 2.4.2
[
1.0518
64] PPP BSD Compress
ion module registered
[ 1.0
57000] PPP Deflate Co
mpression module regi
stered
[
1.062720] PPP MPPE
Compressi
on module
registered
[ 1.06
7951] NET: Registered
protocol
family 24
[ 1.07
3023] PPTP driver ver
sion 0.8.5
[ 1.077289] e
hci_hcd: U
SB 2.0 'Enhanced' Hos
t Controlle
r (EHCI) Driver
[ 1.0848
39] get ehci0-control
ler, regulator_io is
no nocare
[ 1.091264] [s
unxi-ehci0
]: probe, pdev->name:
1c1a000.e
hci0-controller, sunx
i_ehci: 0xf
fffffc000c
464c8, 0x:ffffff80000
94000, irq_no:68
[
1.10476
3] sunxi-ehci 1c1a000.ehci0-con
troller: S
W USB2.0 'Enhanced' H
ost Control
ler (EHCI)
Driver
[ 1.1148
46] sunxi-ehci 1c1a00
0.ehci0-co
ntroller: new USB bus
registere
d, assigned bus numbe
r 1
[ 1.124
975] sunxi
-ehci 1c1a
000.ehci0-controller:
irq 104,
io mem 0xffffffc0003f
6ac8
[ 1.150031] sunxi-ehci 1c1a000.ehci0-controller: USB 0.0 started, EHCI 1.00
[ 1.157758] u*** u***1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.165432] u*** u***1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.173460] u*** u***1: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.181775] u*** u***1: Manufac
turer: Linux 3.10.65 ehci_hcd
[ 1.1877
65] u*** u***1: SerialN
umber: sunxi-ehci
[ 1.1938
07] hub 1-0
:1.0: USB hub found
[ 1.197
923] hub 1
-0:1.0: 1 port detect
ed
[ 1.202654
] [ehci0-controller]:
sunxi_u***
_disable_ehci
[ 1
.208265] [
sunxi-ehci0]: remove,
pdev->nam
e: 1c1a000.ehci0-cont
roller, sunxi_ehci: 0
xffffffc00
0c464c8
[ 1.2188
12] sunxi-ehci 1c1a00
0.ehci0-con
troller: r
emove, state 1
[
1.225496]
u*** u***1: USB discon
nect, devic
e number 1
[
1.232554]
sunxi-ehci 1c1a000.e
hci0-contr
oller: USB bus 1 dere
gistered
[ 1.240170] get
ehci1-con
troller drv
_vbus_gpio is fail
[ 1.2457
80] get eh
ci1-controller, regul
ator_io is
no nocare
[ 1.2
52125] [sun
xi-ehci1]: probe, pd
ev->name: 1
c1b000.ehci1-control
ler, sunxi_
ehci: 0xffffffc000c46
738, 0x:ff
ffff800009c000, irq_n
o:6a
[
1.265610
] sunxi-ehci 1c1b000.
ehci1-cont
roller: SW USB2.0 'En
hanced' Hos
t Controller (EHCI) D
river
[
1.275681] sunxi-eh
ci 1c1b000
.ehci1-controller: ne
w USB bus r
egistered, assigned
bus number
1
[ 1.28569
4] sunxi-eh
ci 1c1b000.ehci1-cont
roller: ir
q 106, io mem 0xfffff
fc0003f6ac
8
[ 1.310031] sunxi-ehci 1c1b000.ehci1-controller: USB 0.0 started, EHCI 1.00
[ 1.317637] ehci_irq: highspeed device connect
[ 1.322820] u*** u***1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.330370] u*** u***1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.338259] u*** u***1: Product: SW USB2.0 'Enhanced' Host Controller (EHCI)
Driver
[ 1.346707] u*** u***1: Manufacturer: Linux 3.10.65 ehci_hcd
[
1.352805] u*** u***1: SerialNumber: sunxi-ehci
[ 1.358620] hub 1-0:1.0: USB hub found
[
1.362813] hub 1-0:1.0: 1 port detected
[ 1.367831] ohci_hc
d: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.374908] get ohci0-controller, regul
ator_io is no nocare
[ 1.381175] hci: request ohci0-contr
oller gpio:1027
[ 1.386533] [sunxi-ohci0]: prob
e, pdev->name: 1c1a000.ohci0-controller, sunxi_ohci:
0xffffffc000c45fe8
[ 1.397027] sunx
i-ohci 1c1a000.ohci0-
controller: SW USB2.0
'Open' Host Controll
er (OHCI)
Driver
[ 1.40671
3] sunxi-ohci 1c1a000
.ohci0-cont
roller: new USB bus
registered, assigned
bus number
2
[ 1.416355] s
unxi-ohci 1c1a000.ohc
i0-controller: irq 10
5, io mem 0x6b61ff72
6b6b6462
[ 1.484070] u*** u***2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.491685] u*** u***2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.499574] u*** u***2: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver
[ 1.507633] u*** u***2: Manufacturer: Linux 3.10.65 ohci_hcd
[ 1.513731] u*** u***2: SerialNumber: sunxi-ohci
[ 1.519548] hub 2-0:1.0: USB hub found
[ 1.523743] hub 2-0:1.0: 1 port detected
[ 1.528448] [ohci0-controller]: sunxi_u***_
disable_ohci
[ 1.534239] [sunxi-ohci0]: remove, pdev->name: 1c1a000.ohci0-contr
oller, sunxi_ohci: 0xffffffc000c45fe8
[ 1.544678] sunxi-ohci 1c1a000.ohci0-controller: remove, state 1
[ 1
.551362] u*** u***2: USB disconnect, device number 1
[ 1.557775] sunxi-ohci 1c1a000
.ohci0-controller: USB bus 2 deregistered
[ 1.565400] get ohci1-controller drv_vbus_gp
io is fail
[ 1.571119] get ohci1-controller, regulator_io is no nocare
[ 1.577286] [sunxi-ohci
1]: probe, pdev->name: 1c1b000.
ohci1-controller, sunxi_ohci: 0xffffffc000
c46258
[ 1.587784] sunxi-o
hci 1c1b000.ohci1-controller: S
W USB2.0 'Open' Host Controller (OHCI) Dri
ver
[ 1.597471] sunxi-ohci
1c1b000.ohci1-contro
ller: new USB bus registered, assigned bu
s number 2
[ 1.607107] sunx
i-ohci 1c1b000.ohci1-
controller: irq 107,
io mem 0x6
b61ff726b6b6462
[ 1.674069] u*** u***2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.680041] u*** 1-1: new high-speed USB device number 2 using sunxi-ehci
[ 1.689160] u*** u***2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.697194] u*** u***2: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver
[ 1.705131] u*** u***2: Manufacturer: Linux 3.10.65 ohci_hcd
[ 1.711232] u*** u***2: SerialNumber: sunxi-ohci
[ 1.717023] hub 2-0:1.0: USB hub found
[ 1.721218] hub
2-0:1.0: 1 port detected
[ 1.726530] u***core: registered
new interface driver cdc_acm
[ 1.7328
23] cdc_acm: USB Abstract Control Model dr
iver for USB modems and ISDN adapters
[ 1.741982] u***core: registered new in
terface driver u***-storage
[
1.748836] u***core: registered new int
erface driver ums-alauda
[ 1.755607]
u***core: registered new interf
ace driver ums-cypre
ss
[ 1.762477] u***core: r
egistered new interfa
ce driver ums-datafab
[ 1
.769334] u***core: reg
istered new interface
driver ums_eneub625
0
[ 1.776401] u
***core: registered ne
w interface driver u
ms-freecom
[ 1.
783280] u***core: regi
stered new interface
driver ums-isd200
[ 1.790069] u***c
ore: regist
ered new interface d
river ums-jumpshot
[ 1.797016] u***co
re: regist
ered new interface dr
iver ums-karma
[
1.803745] u***core:
registered new inte
rface driver ums-onet
ouch
[ 1.81074
6] u***core: registere
d new inte
rface driver ums-real
tek
[ 1.817602]
u***core: registered
new interf
ace driver ums-sddr09
[
1.824426] u***core: re
gistered n
ew interface driver u
ms-sddr55
[ 1.831326] us
bcore: reg
istered ne
w interface driver um
s-u***at
[ 1.838027] u***
1-1: New U
SB device
found, idVendor=1a40,
idProduct
=0101
[ 1.845597]
u*** 1-1:
New USB device string
s: Mfr=0,
Product=1,
SerialNumber=0
[
1.846345]
u***core: registered
new interfa
ce driver u***serial
[ 1.846
557] u***co
re: registered new in
terface dr
iver optio
n
[ 1.846744] u***
serial: USB
Serial support regis
tered for
GSM modem (1-port)
[ 1.8739
02] u*** 1-1: Product
: USB 2.0 H
ub
[ 1.879448]
hub 1-1:1.0
: USB hub
found
[ 1.8838
83] hub 1-
1:1.0: 4 ports detect
ed
[
1.8
91196] mou
sedev: PS/2 mouse dev
ice common
for all m
ice
[ 1.8978
64] u***cor
e: registered new int
erface driv
er xpad
[ 1.90
4073] u***c
ore: regist
ered new interface d
river u***_a
cecad
[ 1.9108
49] u***core
: register
ed new interface driv
er aiptek
[ 1.917248] us
bcore: regi
stered new interface
driver gtc
o
[ 1.923446]
u***core: re
gistered n
ew interface driver h
anwang
[ 1.929918] u***cor
e: registe
red new int
erface driver kbtab
[ 1.
936228] us
bcore: registered new
interface
driver wacom
[
1.944444]
sunxi-rtc 1f00000.rtc
: rtc core:
registered rtc-sunx
i as rtc0
[ 1.95
2043] sunxi-rtc 1f000
00.rtc: RT
C enabled
[
1.957614]
IR NEC pr
otocol handler initia
lized
[
1.962655] IR RC5(x)
protocol
handler in
itialized
[ 1.967
883] IR RC
6 protocol handler in
itialized
[ 1.973001] IR JV
C protocol
handler in
itialized
[ 1.97
7945] IR So
ny protocol handler
initialized
[ 1.983153] IR
RC5 (stream
zap) protocol handler
initializ
ed
[ 1.989235] IR
SANYO pro
tocol handler initial
ized
[
1.994559] IR MCE Key
board/mous
e protocol handler in
itialized
[ 2.001582]
Registere
d IR keyma
p rc_map_sunxi
[ 2.00
7058] input
: sunxi-ir as /devic
es/soc.0/1
f02000.s_cir/rc/rc0/i
nput0
[ 2.015026] rc0:
sunxi-ir a
s /devices
/soc.0/1f02000.s_cir/
rc/rc0
[ 2.
022261] input: MCE IR
Keyboard/
Mouse (sun
xi-rc-recv) as /devic
es/virtual/
input/input1
[
2.032666] sunxi ce
dar version
0.1
[ 2.03668
8] [cedar]:
install s
tart!!!
[ 2.040
915] ycy th
e get irq is 90
[ 2.
045214] ycy
clk_bass_vir 0x18
is ffffff80
000b4018,
the value:3006207
[
2.05276
0] ycy clk_bass_vir 0
x13c is f
fffff80000b413c, the
value:0
[
2.059697] ycy clk
_bass_vir
0x64 is ff
ffff80000b4064, the
value:60181
0
[ 2.067256] yc
y clk_bass_
vir 0x2c4 is ffffff
80000b42c4,
the value:601c10
[
2.07479
8] ycy clk_bass_vir
0x100 is f
fffff80000
b4100, the value:0
[
2.0818
54] [cedar]: install
end!!!
[ 2.120992] input: axp81x-supplyer as /devices/platform/axp81x_board/axp81x-supplyer.47/input/input2
[
2.145645] sunxi budget cooling probe start !
[
2.150672] CPU freq cooling register Success
[ 2.155441]
CPU hotplug cooling register Success
[ 2.161118] CPU
budget cooling register Success
[
2.166870] sunxi gpu cooling probe start !
[ 2.171538]
CPU gpu cooling register Success
[ 2.176662
] device-mapper: uevent: versio
n 1.0.3
[ 2.182309] de
vice-mapper: ioctl:
4.24.0-ioctl (2013-01-15) initia
lised: dm-devel@redha
t.com
[
2.192519] Bluetooth:
HCI UART driver ver
2.2
[
2.197373] Bluetooth: HCI H4 pro
tocol initialized
[
2.202787] Bluetoo
th: HCI Three-wire UA
RT (H5) protocol init
ialized
[ 2.2128
50] cpuidl
e: using governor lad
der
[ 2.217320] c
puidle: using govern
or menu
[
2.222914] sunxi-
mmc 1c11000.sdmmc: S
D/MMC/SDIO Host Contr
oller Driver(v0.37 20
15-11-9 15:13) Compil
ed in Jan 4 2017 at
18:09:56
[ 2.23
6022] sunxi-mmc 1c110
00.sdmmc: regulator p
rop vmmc,str vcc-emmc
v
[ 2.
243281] su
nxi-mmc 1c11000.sdmmc
: regulator prop vqmm
c,str vcc-
emmcvq18
[ 2.250923] sunxi-
mmc 1c1100
0.sdmmc: re
gulator prop vdmmc,s
tr none
[ 2.257842] sunxi
-mmc 1c1100
0.sdmmc: N
o vdmmc regulator fou
nd
[ 2.265123] sunx
i-mmc 1c11
000.sdmmc:
sdc set ios: clk 0Hz
bm PP pm
UP vdd 22 width 1 tim
ing LEGACY(
SDR12) dt
B
[ 2.290027] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
[ 2.320069] sunxi-mmc 1c11000.sdmmc: base:0xffffff80000b6000 irq:94
[ 2.320
864] sunxi-mmc 1c11000.sdmmc: smc 0 p2 err, cmd 52,
RTO !!
[ 2.321696] sunxi-mmc 1c11000.sdmmc: smc 0 p2 err, cmd 52, RTO !!
[
2.321714] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 wi
dth 1 timing LEGACY(SDR12) dt B
[ 2.324117] sunxi-mmc 1c11000.sdmmc: sdc set io
s: clk 400000Hz bm PP pm ON vdd 22 width 1
timing LEGACY(SDR12
) dt B
[ 2.325986
] sunxi-mmc 1c11000.s
dmmc: smc
0 p2 err, cmd 8, RTO
!!
[ 2.326813] su
nxi-mmc 1c11000.sdmm
c: smc 0 p2 err, cmd
5, RTO !!
[ 2.327638] sunxi
-mmc 1c110
00.sdmmc: smc 0 p2 er
r, cmd 5, RTO !!
[
2.328463] sunxi-mmc
1c11000.s
dmmc: smc 0 p2 err, c
md 5, RTO !!
[ 2
.329288] su
nxi-mmc 1c11000.sdmm
c: smc 0 p2 err, cmd
5, RTO !!
[ 2.330116] sunxi
-mmc 1c1100
0.sdmmc: s
mc 0 p2 err, cmd 55,
RTO !!
[
2.330943] sunxi-mm
c 1c11000.
sdmmc: smc 0 p2 err,
cmd 55, RT
O !!
[ 2.331771]
sunxi-mmc
1c11000.sdm
mc: smc 0 p2 err, cmd
55, RTO !
!
[ 2.332598] su
nxi-mmc 1c11000.sdmmc
: smc 0 p2
err, cmd 55, RTO !!
[ 2.332
616] sunxi
-mmc 1c11000.sdmmc: s
dc set ios
: clk 400000Hz bm OD
pm ON vdd
22 width 1
timing LEGACY(SDR12)
dt B
[
2.332969] sunxi-mmc
1c11000.sd
mmc: sdc set ios: cl
k 400000Hz
bm OD pm ON vdd 7 wid
th 1 timin
g LEGACY(SDR12) dt B
[ 2.33
3011] sunx
i-mmc 1c11000.sdmmc:
sdc set ios: clk 4000
00Hz bm OD
pm ON vdd 7 width 1
timing LEG
ACY(SDR12) dt B
[
2.333051]
sunxi-mmc 1c11000.sd
mmc: sdc set ios: clk
400000Hz
bm OD pm ON vdd 7 wid
th 1 timin
g LEGACY(SDR12) dt B
[ 2.335448] sunxi
-mmc 1c110
00.sdmmc: s
dc set ios: clk 4000
00Hz bm OD
pm ON vdd
7 width 1 timing LEGA
CY(SDR12)
dt B
[ 2.351212]
sunxi-mmc
1c11000.sdmmc: sdc se
t ios: clk
400000Hz bm PP pm ON
vdd 7 wid
th 1 timing LEGACY(SD
R12) dt B
[ 2.362
759] mmc0: BKOPS_EN
bit is not
set
[ 2.497
916] sunxi-
mmc 1c0f00
0.sdmmc: SD/MMC/SDIO
Host Contro
ller Driver(v0.37 20
15-11-9 15
:13) Compiled in Jan
4 2017 at
18:09:56
[ 2.510
989] sunxi
-mmc 1c11000.sdmmc: s
dc set ios
: clk 400000Hz bm PP
pm ON vdd
7 width 1 t
iming MMC-HS(SDR20) d
t B
[
2.511019] sunxi-mmc 1
c0f000.sdm
mc: regulator prop vm
mc,str vcc
-sdcv
[ 2.511026]
sunxi-mmc
1c0f000.sd
mmc: regulator prop
vqmmc,str v
cc-sdcvq33
[ 2.5
11033] sunx
i-mmc 1c0f000.sdmmc:
regulator
prop vdmmc,str vcc-sd
cvd
[
2.544603] mmc0: Che
ck switch r
eady sunxi_mmc_check
_timing_swi
tch_done
[ 2.5
52174] sun
xi-mmc 1c0f000.sdmmc:
Got CD GPI
O #166.
[ 2.5522
95] sunxi-
mmc 1c11000.sdmmc: sd
c set ios:
clk 500000
00Hz bm PP pm ON vdd
7 width 1
timing MMC-HS(SDR20)
dt B
[
2.569603] sunxi-mmc
1c11000.sd
mmc: sdc set ios: cl
k 50000000H
z bm PP pm ON vdd 7 w
idth 8 tim
ing MMC-HS(SDR20) dt
B
[ 2.
580273] su
nxi-mmc 1c0f000.sdmmc
: base:0xf
fffff80000be000 irq:9
2
[ 2.580717] sun
xi-mmc 1c10000.sdmmc
: SD/MMC/SD
IO Host Controller D
river(v0.37
2015-11-9 15:13) Com
piled in J
an 4 2017 at 18:09:5
6
[ 2.
580752] su
nxi-mmc 1c10000.sdmmc
: Can't get vmmc regu
lator stri
ng
[ 2.580757] su
nxi-mmc 1c
10000.sdmmc
: Can't get vqmmc re
gulator str
ing
[ 2.580762] s
unxi-mmc 1
c10000.sdmmc: Can't g
et vdmmc r
egulator string
[
2.580764]
get() with no identi
fier
[
2.580766] get() with
no identi
fier
[ 2.580767]
get() with
no identif
ier
[ 2.580771]
sunxi-mmc 1c10000.sdm
mc: No vmm
c regulator found
[
2.580775
] sunxi-mm
c 1c10000.sdmmc: No v
qmmc regul
ator found
[ 2.5
80778] sunx
i-mmc 1c10000.sdmmc:
No vdmmc r
egulator found
[
2.65381
9] sunxi-mmc 1c11000
.sdmmc: sdc
set ios: clk 500000
00Hz bm PP
pm ON vdd 7 width 8 t
iming UHS-
DDR50 dt B
[ 2.654216] sunx
i-mmc 1c10
000.sdmmc: sdc set io
s: clk 0Hz
bm PP pm UP vdd 21 w
idth 1 tim
ing LEGACY(SDR12) dt
B
[ 2.6
54234] sunxi-mmc 1c1
0000.sdmmc:
no vqmmc,Check if th
ere is reg
ulator
[ 2.67003
3] sunxi-mm
c 1c10000.sdmmc: sdc
set ios: c
lk 400000Hz bm PP pm
ON vdd 21
width 1 timing LEGACY
(SDR12) dt
B
[ 2
.690057] sunxi-mmc 1c
10000.sdmmc
: base:0xffffff80000
c6000 irq:9
3
[ 2.702389] s
unxi-mmc 1
c11000.sdmmc: sdc set
ios: clk 5
0000000Hz bm PP pm O
N vdd 7 wid
th 8 timing UHS-DDR5
0 dt B
[ 2.713932] mmc0:
new high s
peed DDR MM
C card at address 00
01
[ 2.721509]
mmcblk0: m
mc0:0001 8W
PD3R 7.28 GiB
[
2.7278
10] mmcblk0boot0: mmc
0:0001 8WP
D3R partiti
on 1 4.00 MiB
[ 2.
735203] hid
raw: raw HID events d
river (C)
Jiri Kosina
[
2.741527]
mmcblk0boo
t1: mmc0:0001 8WPD3R
partition
2 4.00 MiB
[
2.74977
5] mmcblk
0: p1 p2 p3 < p5 p6 p
7 p8 p9 p1
0 p11 p12 p13 p14 p15
p16 p17 >
[ 2.758165] mmc
blk0: p1 si
ze 8937472 extends be
yond EOD,
[ 2.760162] u***co
re: registe
red new in
terface driver u***hid
[ 2.76
0165] u***hid: USB HI
D core dri
ver
truncated
[
2.774903
] zram: Created 1 dev
ice(s) ...
[ 2.780173] drm
config ser
vice not a
vailable:
FFFFFFFF
[ 2.
787089] ashmem: initi
alized
[ 2.791183] log
ger: create
d 256K log
'log_main'
[
2.796565]
logger: cr
eated 256K log 'log_
events'
[ 2.802228] log
ger: creat
ed 256K log
'log_radio'
[ 2.807
982] logger
: created 256K log '
log_system
'
[
2.8
16166] u***
core: registered new
interface
driver snd-u***-audio
[ 2.817
929] mmcb
lk0boot1: unknown par
tition tab
le
[ 2.8298
44] mmcblk
0boot0: un
known partition table
[ 2.8
34099] add
a_com_reg_readl: reg
= 0xffffff80000545c0
[ 2.83
4105] adda
_com_reg_wr
itel: val = 0x78, reg
= 0xfffff
f80000545c0
[ 2.8488
86] *mmc0
lock timeout*
[ 2
.849093] s
unxi-codec-machine so
und.6: co
dec-aif1 <-
> 1c22c00.i2s0-contr
oller mappi
ng ok
[ 2.849639
] sunxi-cod
ec-machine
sound.6: codec-aif2
<-> bb-da
i mapping ok
[ 2.
850307] su
nxi-codec-machine sou
nd.6: code
c-aif2 <-> bb-dai ma
pping ok
[
2.850783] sunxi-
codec-machi
ne sound.6: codec-a
if3 <-> bb-
dai mappin
g ok
[ 2.88
7077] inpu
t: audiocod
ec sunxi Audio Jack
as /devices
/soc.0/sou
nd.6/sound/card0/inpu
t3
[ 2.89773
3] SUNXI_HM
IC_STS:8,2
25
[ 2.901379] p
lugout_end:
switch:0
[ 2.9
05211] snd
hdmi sound.7: sndhdm
i <-> 1c22
800.daudio
mapping ok
[
2.91
4062] u32 classifier
[ 2.91
7014]
Actions configured
[
2.9208
59] Netfilter message
s via NETL
INK v0.30.
[ 2.9
26101] nf_
conntrack v
ersion 0.5.0 (16384 b
uckets, 65
536 max)
[
2.933464]
ctnetlink v
0.93: registering wit
h nfnetlink.
[
2.
941247] NF_
TPROXY: Transparent
proxy suppo
rt initial
ized, version 4.1.0
[ 2.948
848] NF_TPROXY: Copyr
ight (c) 2
006-2007 Ba
laBit IT Ltd.
[
2.9568
86] xt_time: kernel t
imezone is
-0000
[ 2.9618
50] ipip: I
Pv4 over IPv4 tunneli
ng driver
[ 2.968076] gre:
GRE over I
Pv4 demult
iplexor driver
[
2.973505]
ip_gre: GR
E over IPv4 tunneling
driver
[
2.98
1107] ip_t
ables: (C) 2000-2006
Netfilter
Core Team
[ 2.987309] a
rp_tables:
(C) 2002 D
avid S. Miller
[
2.990862]
sunxi-mmc 1c10000.sd
mmc: smc 2
p1 err, cmd 52, RTO !
!
[ 2.
991687] su
nxi-mmc 1c10000.sdmmc
: smc 2 p1
err, cmd 52, RTO !!
[ 2.99
1706] sunxi
-mmc 1c10000.sdmmc:
sdc set ios
: clk 400000Hz bm PP
pm ON vdd
21 width 1 timing LEG
ACY(SDR12)
dt B
[
2.994145] sunxi-mmc
1c10000.s
dmmc: sdc set ios: cl
k 400000Hz
bm PP pm ON vdd 21 w
idth 1 timi
ng LEGACY(SDR12) dt
B
[ 2.9
96006] sunxi-mmc 1c1
0000.sdmmc:
smc 2 p1
err, cmd 8, RTO !!
[
2.9968
25] sunxi-mmc 1c10000
.sdmmc: sm
c 2 p1 err, cmd 5, RT
O !!
[ 2.997643]
sunxi-mmc
1c10000.sdmmc: smc 2
p1 err, cm
d 5, RTO !!
[ 2.998460] sun
xi-mmc 1c10
000.sdmmc: smc 2 p1
err, cmd 5,
RTO !!
[ 2.9992
77] sunxi-m
mc 1c10000.sdmmc: smc
2 p1 err,
cmd 5, RTO !!
[
3.000098]
sunxi-mmc 1c10000.sdm
mc: smc 2
p1 err, cmd
55, RTO !!
[ 3.
000918] sun
xi-mmc 1c10000.sdmmc
: smc 2 p1 err, cmd 5
5, RTO !!
[ 3.001738] sunxi
-mmc 1c100
00.sdmmc: s
mc 2 p1 err, cmd 55,
RTO !!
[
3.002558] sunxi-m
mc 1c10000.
sdmmc: smc
2 p1 err, cmd 55, RT
O !!
[ 3.002573]
sunxi-mmc
1c10000.sdmmc: sdc se
t ios: clk
400000Hz b
m OD pm ON vdd 21 wi
dth 1 timin
g LEGACY(SDR12) dt B
[ 3.00
3419] sunxi-mmc 1c100
00.sdmmc:
smc 2 p1 err, cmd 1,
RTO !!
[
3.003435] sunxi-mm
c 1c10000.
sdmmc: sdc
set ios: clk 0Hz bm
OD pm OFF v
dd 0 width 1 timing
LEGACY(SDR1
2) dt B
[ 3.0044
85] *mmc2 u
nlock*
[ 3.1219
02] TCP: b
ic registered
[ 3
.125327] T
CP: cubic registered
[ 3.12
8941] TCP:
westwood registered
[ 3.133
034] TCP:
htcp registered
[
3.136553]
Initializing XFRM ne
tlink sock
et
[ 3.141674
] NET: Regi
stered pro
tocol family 10
[ 3.148924] mip6: Mobile IPv6
[ 3.152428] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 3.158744] sit: IPv6 over IPv4 tunneling driver
[ 3.165317] NET: Registered protocol family 17
[ 3.170339] NET: Registered protocol family 15
[ 3.175761] Bluetooth: RFCOMM TTY layer initialized
[ 3.181232] Bluetooth: RFCOMM socket layer initialized
[ 3.186840] Bluetooth: RFCOMM ver 1.11
[ 3.191099] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 3.196
897] Bluetooth: BNEP filters: protocol multicast
[ 3.20282
3] Bluetooth: BNEP socket layer initialized
[ 3.208241] Bluetooth: H
IDP (Human Interface Emulation) ver 1.2
[ 3.214931] Bluetooth: HIDP socket laye
r initialized
[ 3.221167] Registering SWP/SWPB emulation handler
[ 3.228356] get u***_seri
al_number success fro
m boot command line
[sw_udc
]: alloc request: ep(0xffffffc0
00af2070,
ep0, 64), req(0xfffff
fc06af7ec40)
[ 3
.243355] [s
w_udc]: sunxi_udc_se
t_selfpowered_2320: u
*** device
is not active
[ 3
.251384] [sw_udc]: su
nxi_udc_pu
llup, is_on = 0
[
3.256520] [sw_udc]:
sunxi_udc_
set_pullup_2337: u***
device is
not active
[ 3
.264370] f
ile system registered
[ 3.271649] android_u*** gadget: Mass Storage Function, version: 2009/09/11
[ 3.279161] android_u*** gadget: Number of LUNs=3
[ 3.284459] lun0: LUN: removable file: (no medium)
[ 3.289783] lun1: LUN: removable file: (no medium)
[ 3.295289] lun2: LUN: removable file: (no medium)
[ 3.301482] [sw_udc]: sunxi_udc_set_selfpowered_2320: u*** device is not active
[ 3.309376] android_u*** gadget: android_u*** ready
[ 3.314733] [sw_udc]: [sunxi_u***_udc]: binding gadg
et driver 'android_u***'
[ 3.322564] sunxi-rtc 1f00000.rtc: setting system clo
ck to 2010-01-01 00:00:08 UTC (1262304008)
[
3.333481] input: sunxi-ths as /devices/virtual/input/input4
[ 3.340255] thermal therm
al_zone0: failed to read out thermal zone 0
[ 3.355754] ALSA device list:
[ 3.359007] #0: audiocodec
[ 3.362366] #1: sndhdmi
[ 3.365818] Freeing unused kernel memory: 532K (ffffffc000a1a000 - ffffffc000a9f000)
[ 3.376871] init: init started!
[ 3.390708] SELinux: 2048 avtab hash slots, 5054 rules.
[ 3.396698] SELinux: Android master ker
nel running Android M policy in compatibility mode.
[ 3.411534] SELinux: 2048 avtab
hash slots, 5054 rules.
[ 3.417266] SELinux: 1 users, 2 roles, 540 t
ypes, 0 bools, 1 sens, 1024 cats
[ 3.425290] SELinux: 87
classes, 5054 rules
[ 3.433572] SELinux: Completing
initialization.
[ 3.438620] SELinux: Setting
up existing superblocks.
[
3.444577] SELinux: initialized
(dev sysfs, type sysfs), uses genfs_conte
xts
[ 3.452534] SELinux: i
nitialized (dev rootfs, type rootfs), uses
genfs_contexts
[ 3.46077
5] SELinux: initialized (dev bd
ev, type bdev), not configured f
or labeling
[ 3.469145] SE
Linux: initialized (d
ev proc, type proc),
uses genfs
_contexts
[ 3.47
7039] SELinux: initia
lized (dev tmpfs, typ
e tmpfs), uses transi
tion SIDs
[ 3.485083] SELin
ux: initialized (dev
devtmpfs,
type devtmpfs), uses
transition SIDs
[ 3.494179] SEL
inux: initi
alized (dev debugfs,
type debug
fs), uses genfs_conte
xts
[ 3.519563] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[ 3.527413] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[ 3.535062] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
[ 3.545123] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[ 3
.553370] SELinux: initialized (
dev selinux
fs, type selinuxfs), uses genfs
_contexts
[ 3.562144] SELinux: initi
alized (dev configfs, type configfs), not
configured for labeling
[ 3.571428] SELinux: initialized (
dev tmpfs, type tmpfs), uses transition S
IDs
[ 3.579336] SELinux: initialized
(dev sysfs, type sysfs), uses genfs_contexts
[ 3.655978] type=1403 audit(1262304008.820:2): policy loaded auid=4294967295 ses=4294967295
[ 3.666061] type=1404 audit(1262304008.840:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[ 3.720215] init: (Initializing SELinux enforcing took 0.34s.)
[ 3.733570] init: init second stage started!
[ 3.794127] init: waitpid failed: No child processes
[ 3.799822] init: (Loading properties from /default.prop took 0.00s.)
[ 3.809265] init: (Parsing /init.environ.rc took 0.00s.)
[
3.815556] init: (Parsing /init.u***.rc took 0.00s.)
[ 3.821456] i
nit: /init.sun50iw1p1.rc: 155: invalid command 'setenforce'
[ 3.828834] init:
/init.sun50iw1p1.rc: 202: invalid command 'ifeq'
[ 3.83586
3] init: /init.sun50iw1p1.rc: 207: invalid option 'endif'
[ 3.843131] init
: (Parsing init.sensors.rc took 0.00s.)
[ 3.848847] init:
(Parsing init.common.rc took 0.01s.)
[ 3.854888] init: (Parsing init.sun50iw
1p1.u***.rc took 0.00s.)
[
3.861487] init: (Parsing init.z
ygote64_32.rc took 0.00s.)
[ 3.867582
] init: (Parsing /init.sun50iw1p1.rc took
0.05s.)
[ 3.874288] ini
t: (Parsing /init.u***.configfs.
rc took 0.00s.)
[ 3.880761] init: /i
nit.zygote64_32.rc: 1
: ignored duplicate definition of service
'zygote'
[ 3.890068] init:
/init.zygote64_32.rc
: 10: ignored duplic
ate definition of service 'zygo
te_secondary'
[ 3
.900426] init: (Parsing /init.z
ygote64_32.rc took 0.
02s.)
[ 3.90672
9] init: (Parsing /in
it.trace.rc took 0.0
0s.)
[ 3.912560]
init: (Parsing /init.rc took 0.10s.)
[ 3.917827] init:
SELinux: Co
uld not get canonical
path /adb
_keys restorecon: No
such file or directo
ry.
[ 3.928558]
init: Starting servi
ce 'ueventd
'...
[ 3.
934250] ini
t: Waiting for /dev/
.coldboot_d
one...
[ 3.936317
] ueventd: ueventd s
tarted!
[ 4.715557] ueventd: Coldboot took 0.77s.
[ 4.723620] init: Waiting for /dev/.coldboot_done took 0.79s.
[ 4.730121] init: /dev/hw_random not found
[ 4.736366] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 4.745380] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 4.755973] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 4.76971
0] init: write_file: Unable to open '/proc/cpu/alignment': No such file or director
y
[ 4.779588] init: write_file: Unable to open '/proc/sys/kernel/
sched_compat_yield': No such file or directory
[ 4.793030] SELinux: initia
lized (dev cgroup, type cgroup)
, uses genfs_contexts
[ 4.801509]
init: write_file: Unable to write to '/dev/cpuctl/cp
u.shares': Invalid argument
[ 4.812731] SELinux:
initialized (dev cgroup, type
cgroup), uses genfs_c
ontexts
[ 4.826265] SELinux: initialized (dev pstore, type pstore), uses genfs_contexts
[ 4.834813] init: write_file: Unable to open '/proc/sys/abi/swp': No such file or directory
[ 4.845655] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 4.854259] init: /dev/hw_random not found
[ 4.890265] [NAND]Failed to insmod nand!!!
[ 4.901454] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: barrier=1
[ 4.910780] SELinux: initialized (dev mmcblk0p7, type ext4), uses xattr
[ 4.918160] fs_mgr: __mount(source=/dev/block/by-name/system,target=/system,t
ype=ext4)=0
[ 4.928029] EXT4-fs (mmcblk0p11): VFS: Can't find ext4 file
system
[ 4.934924] fs_mgr: check_fs(): mount(/dev/block/by-name/cac
he,/cache,ext4)=-1: Invalid argument
[ 4.945593] fs_mgr: Running /system/bin/e2f
sck on /dev/block/by
-name/cache
[ 5.023294] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[ 5.023294]
[ 5.030054] e2fsck: ext2fs_open2: Bad magic number in super-block
[ 5.030054]
[ 5.038330] e2fsck: /system/bin/e2fsck: Superblock invalid, trying backup blocks...
[ 5.038330]
[ 5.048627] e2fsck: /system/bin/e2fsck: Bad magic number in super-block while trying to open /dev/block/by-name/cache
[ 5.048627]
[ 5.062067] e2fsck:
[ 5.062067]
[ 5.066071] e2fsck: The superblock could not be read or do
es not describe a correct ext2
[ 5.066071]
[ 5.076775] e2fsck:
filesystem. If the device is valid and it really contains an ext2
[ 5.076775]
[ 5.0
87220] e2fsck: filesystem (and not swap or ufs or something el
se), then the superblock
[ 5.087220]
[ 5.09
8146] e2fsck: is corrupt, and you might try running e2fsck with an alter
nate superblock:
[ 5.098146]
[ 5.109361] e2
fsck: e2fsck -b 8193
[ 5.109361]
[ 5.116
065] e2fsck:
[ 5.116065]
[ 5.12
0150] e2fsck: e2fsck
terminated by exit(8
)
[ 5.120150]
[
5.127821] EXT4-fs
(mmcblk0p11): VFS: C
an't find ext4 filesy
stem
[ 5.134690]
fs_mgr: __mount(sou
rce=/dev/block/by-nam
e/cache,target=/cache
,type=ext4)=-1
[ 5.14
4179] fs_mgr: fs_mgr
_mount_all(): /dev/bl
ock/by-name/cache is
wiped and /cache ext4
is formattable. For
mat it.
[
5.15588
2] fs_mgr: fs_mgr_do
_format: Fo
rmat /dev/block/by-n
ame/cache a
s 'ext4'.
[ 7.216568] EXT4-fs (mmcblk0p11): Ignoring removed nomblk_io_submit option
[ 7.228701] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[ 7.240521] SELinux: initialized (dev mmcblk0p11, type ext4), uses xattr
[ 7.247911] fs_mgr: check_fs(): mount(/dev/block/by-name/cache,/cache,ext4)=0: Success
[ 7.258106] fs_mgr: check_fs(): unmount(/cache) succeeded
[ 7.26
4176] fs_mgr: Running /system/bin/e2fsck on /dev/block/by-name/cache
[ 7.293166] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[ 7.293166]
[ 7.299767] e2fsck: /dev/block/by-name/cache: clean, 11/49152 files, 6355/196608 blocks
[ 7.299767]
[ 7.311484] EXT4-fs (mmcblk0p11): Ignoring removed nomblk_io_submit option
[ 7.323566] EXT4-fs (mmcblk0p11): mounted filesystem w
ith ordered data mode. Opts: barrier=1,data=ordered,nomblk_io_submit,noau
to_da_alloc,errors=panic
[ 7.338659] SELinux: initialized (dev mmcblk0p11, type ext4), u
ses xattr
[ 7.346165] fs_mgr: __mount(source=/dev/block/by-name/cache,target=/
cache,type=ext4)=0
[ 7.355643] EXT4-fs (mmcblk0p16): VFS: Can't find ext4 filesyste
m
[ 7.362519] fs_mgr: check_fs(): mount(/dev/block/by-name/alog,/logger,ext4)
=-1: Invalid argument
[ 7.372331] fs_
mgr: Running /system/bin/e2fsck on /dev/bl
ock/by-name/alog
[ 7.399294] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[ 7.399294]
[ 7.406024] e2fsck: ext2fs_open2: Bad magic number in super-block
[ 7.406024]
[ 7.414471] e2fsck: /system/bin/e2fsck: Superblock invalid, trying backup blocks...
[ 7.414471]
[ 7.424632] e2fsck: /system/bin/e2fsck: Bad magic number in super-block while trying to open /dev/block/b
y-name/alog
[ 7.424632]
[ 7.437969] e2fsck:
[ 7.437969]
[ 7.442057] e2fsck: The superblock could not be read or does not describe a correct ext2
[ 7.4420
57]
[ 7.452720] e2fsck: filesystem. If the device is valid and it
really contains an ext2
[ 7.452720]
[ 7.46
3165] e2fsck: filesystem (and not swap or ufs or som
ething else), then the superblock
[ 7.463165]
[ 7.474091] e2fsck: is corrupt, and yo
u might try running e2fsck with an alterna
te superblock:
[ 7.474091]
[ 7.485305] e2f
sck: e2fsck -b 8193
[ 7.4
85305]
[ 7.4919
86] e2fsck:
[ 7.
491986]
[ 7.495
994] e2fsck: e2fsck t
erminated by exit(8)
[ 7.495994]
[ 7.503701]
EXT4-fs (mmcblk0p16)
: VFS: Can't find ext
4 filesystem
[ 7.510567]
fs_mgr: __mount(sourc
e=/dev/block/by-name/
alog,target=/logger,t
ype=ext4)=-1
[ 7.520047] fs_mgr
: fs_mgr_m
ount_all():
/dev/block/by-name/
alog is wip
ed and /lo
gger ext4 is formatta
ble. Forma
t it.
[
7.531750] fs_mgr: f
s_mgr_do_fo
rmat: Format /dev/bl
ock/by-nam
e/alog as 'ext4'.
[ 7.970168] EXT4-fs (mmcblk0p16): Ignoring removed nomblk_io_submit option
[ 8.058355] EXT4-fs (mmcblk0p16): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[ 8.070176] SELinux: initialized (dev mmcblk0p16
, type ext4), uses xattr
[ 8.077562] fs_mgr: check_fs(): mount(/dev
/block/by-name/alog,/logger,ext4)=0: Success
[ 8.150063] fs_mgr: check_fs(): unmount(/logger) succeeded
[ 8.156109] fs_mgr: Running /system/bin/e2fsck on /dev/block/by-name/alog
[ 8.186114] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[ 8.186114]
[ 8.192864] e2fsck: /dev/block/by-name/alog: clean, 11/5120 fi
les, 1358/20480 blocks
[ 8.192864]
[ 8.204140] EXT4-
fs (mmcblk0p16): Ignoring removed nomblk_io_submit option
[ 8.216172] EXT4-fs (mmcblk0p16): mounted filesystem with
ordered data mode. Opts: barrier=1,data=ordered,nomblk_io_submit,noauto_d
a_alloc,errors=panic
[ 8.231272] SELinux: initialized (dev mmcblk0p16, type ex
t4), uses xattr
[ 8.238644] fs_mgr: __mount(source=/dev/bl
ock/by-name/alog,target=/logger,type=ext4
)=0
[ 8.248193] EXT4-fs (mmcblk
0p1): VFS: Can't find ext4 filesystem
[
8.255008] fs_mgr: check_fs(): mount(/
dev/block/by-name/UDISK,/data,ext4)=-1: In
valid argument
[ 8.264732]
fs_mgr: Running /system/bin/e2fsck on /d
ev/block/by-name/UDIS
K
[ 8.292599] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[ 8.292599]
[ 8.299196] e2fsck: ext2fs_open2: Bad magic number in super-block
[ 8.299196]
[ 8.307749] e2fsck: /system/bin/e2fsck: Superblock invalid, trying backup blocks...
[ 8.307749]
[ 8.317906] e2fsck: /system/bin/e2fsck: Bad magic number in super-block
while trying to open /dev/block
/by-name/UDISK
[ 8.317906]
[ 8.331340] e2fsck:
[
8.331340]
[ 8.335343] e2fsck: The superblock could not be read or does not d
escribe a correct ext2
[ 8.335343]
[ 8.346051] e2fsck: filesystem. If the device is
valid and it really contains an ext2
[ 8.346051]
[ 8.356500] e2fsck: file
system (and not swap or ufs or
something else), then the super
block
[ 8.356500]
[ 8.367427] e2
fsck: is corrupt, and
you might try runnin
g e2fsck with an alt
ernate superblock:
[
8.367427]
[ 8.378646]
e2fsck: e2fsck -b
8193
[
8.378646]
[ 8.3
85332] e2fsck:
[
8.385332]
[ 8.
389341] e2fsck: e2fsc
k terminated by exit(
8)
[ 8.389341]
[ 8.397
062] EXT4-fs (mmcblk0
p1): VFS: Can't find
ext4 filesystem
[
8.403830] fs_mgr:
__mount(source=/dev/b
lock/by-name/UDISK,ta
rget=/data,type=ext4)
=-1
[ 8.41
3218] fs_mgr: fs_mgr_
mount_all(): /dev/blo
ck/by-name/UDISK is
wiped and /
data ext4 is formatt
able. Forma
t it.
[ 8.42496
2] fs_mgr:
fs_mgr_mount_all():
also wipe
/dev/block/by-name/me
tadata
[
8.432955] mmc0:mm
c_do_erase:
erase from 6135808
to 6168575
arg 0x80000000
[ 8.453041] fs_mgr: fs_mgr_do_format: Format /dev/block/by-name/UDISK as 'ext4'.
[ 17.997677] EXT4-fs (mmcblk0p1): Ignoring removed nomblk_io_submit option
|
0
/7 
工商网监
湘ICP备2023018690号
27293
淘帖
赞
回复
显身卡
